Skip to end of banner
Go to start of banner

3618 Reader Install Guide

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Washer Extractor
Manufacturer: Dexter
Make: Dexter
Model Length: Not Set

Will not show mounting kits unless payment device setup is specified. Model number on the machine will not include this. For coin prepped models the number will end in US. For Easy Card prepped models, they will end in EC.

Associated Models


WCAD18KCB12CN
WCAD18KCS10
WCAD18KCS10EC
WCAD18KCS10ECUS
WCAD18KCS10US
WCAD18KCS10USA
WCAD18KCS12
WCAD18KCS12000
WCAD18KCS12CN
WCAD18KCS12EC
WCAD18KCS12EC1X
WCAD18KCS12ECSZ
WCAD18KCS12SZ
WCAD18KCS12US
WCAD18KCS12USA
WCAD18KCS13EC
WCAD20KCB10CN
WCAD20KCB10US
WCAD20KCB10USA
WCAD20KCB10USWCAD
WCAD20KCB12CN
WCAD20KCB12CNSZ
WCAD20KCB12ECSZ
WCAD20KCB12US
WCAD20KCB12USS2
WCAD20KCB12USSZ
WCAD20KCS10
WCAD20KCS10EC
WCAD20KCS10US
WCAD20KCS12
WCAD20KCS12EC
WCAD20KCS12ECSZ
WCAD20KCS12EX
WCAD20KCS12US
WCAD20KCS12USSZ
WCAD20KCX10CN
WCAD20KCX10US
WCAD20KCX12CN
WCAD20KCX12US
WCAD20KCX12USSZ
WCAD25KCS12
WCAD25KCS12EC
WCAD25KCS12EC2X55BC5U
WCAD25KCS12SZ
WCAD25KCS12US
WCAD25KCS12USX
WCAD30KCB12BN
WCAD30KCB12CN
WCAD30KCB12CNSZ
WCAD30KCB12CNSZSSBCSUSA
WCAD30KCB12ECSZ
WCAD30KCB12US
WCAD30KCB12USA
WCAD30KCB12USSZ
WCAD30KCS12
WCAD30KCS12ECSZ
WCAD30KCS12SZ
WCAD30KCS12US
WCAD30KCS12USSZ
WCAD30KCX12CN
WCAD30KCX12CNSZ
WCAD30KCX12US
WCAD30KCX12USSX
WCAD30KCX12USSZ
WCAD40KCB12CN
WCAD40KCB12US
WCAD40KCB12USSZ
WCAD40KCS12
WCAD40KCS12CP
WCAD40KCS12EC
WCAD40KCS12US
WCAD40KCS17
WCAD40KCX12CN
WCAD40KCX12US
WCAD50KCB12CNSZ
WCAD50KCB12ECSZ
WCAD50KCB12USA
WCAD50KCB12USSZ
WCAD50KCS12ECSZ
WCAD50KCS12FZ
WCAD50KCS12SZ
WCAD50KCS12USSZ
WCAD50KCX12USSZ
WCAD55KCS12
WCAD55KCS12CP
WCAD55KCS12ECSZ
WCAD55KCS12US
WCAD55KCX12
WCAD60KCB12
WCAD60KCB12CN
WCAD60KCB12CNSZ
WCAD60KCB12CNSZSSBCSUSA
WCAD60KCB12NC
WCAD60KCB12US
WCAD60KCB12USA
WCAD60KCB12USSX
WCAD60KCB12USSZ
WCAD60KCS12
WCAD60KCS12CN
WCAD60KCS12EC
WCAD60KCS12US
WCAD60KCX12CN
WCAD60KCX12CNFZ
WCAD60KCX12US
WCAD60KCX12USSZ
WCAD75KCB12US
WCAD75KCS12
WCAD75KCS12EC
WCAD75KCS12US
WCAD80KCB12
WCAD80KCB12CN
WCAD80KCB12ECSZ
WCAD80KCB12U
WCAD80KCB12US
WCAD80KCB12USA
WCAD80KCB12USSZ
WCAD80KCS12
WCAD80KCS1200
WCAD80KCS12EC
WCAD80KCS12US
WCAD80KCS12USSZ
WCAD80KCX12CN
WCAD80KCX12US
WCAD80KCX12USA
WCAD90KCB12CNSZ
WCAD90KCB12USSZ
WCAD90KCS12ECSZ
WCAD90KCX12CNSZ

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Install Mounting Hardware

 I-M0012

Part #: C-0144

Desc 1: Screw

Desc 2: 8-32 x 2" - Flat

   Qty: 2

Part #: C-0905

Desc 1: Drop Cover

Desc 2: 2-3/8" x 4-5/8"

   Qty: 1

Part #: C-6801

Desc 1: F2/F3 Reader Mounting Kit

Desc 2: Universal

   Qty: 1

Part #: C-6936

Desc 1: F2, Sm Vault Mount Bracket

Desc 2:

   Qty: 1

  1. Install the C-5702 Chase Nipple into the C-5414 F2 Mounting Bracket using the C-5703 Nut.

  2. Feed the remaining harness ends through the open face of the Coin Vault.

  3. Spread the C-6936 Vault Mount Bracket wings outward before insertion to lock bracket into place.

  4. Feed remaining harness ends through the C-6936 Vault Mount Bracket.

  5. Insert the C-6936 Vault Mount Bracket into the Coin Vault.

  6. Feed the remaining harness ends through the combined C-5414 F2 Mounting Bracket.

  7. Secure the combined C-5414 F2 Mounting Bracket to the C-6939 Vault Mount Bracket with the C-0144 Screws.

 I-M0103

Part #: C-0144

Desc 1: Screw

Desc 2: 8-32 x 2" - Flat

   Qty: 2

Part #: C-0905

Desc 1: Drop Cover

Desc 2: 2-3/8" x 4-5/8"

   Qty: 1

Part #: C-6601

Desc 1: Spacer

Desc 2: F2 Dexter Vault Filler Plate

   Qty: 1

Part #: C-6602-V2

Desc 1: F2, Large Vault Mount

Desc 2: Modified version

   Qty: 1

Part #: C-6801

Desc 1: F2/F3 Reader Mounting Kit

Desc 2: Universal

   Qty: 1

  1. Attach the C-5414 F2 Mounting Bracket to the C-6602 Spacer Plate using the C-5702 Chase Nipple and the C-5703 Nut.

  2. Feed the remaining harness ends through the open face of the Coin Vault.

  3. Spread the C-6602 Vault Mount Bracket wings outward before insertion to lock bracket into place.

  4. Feed remaining harness ends through the C-6602 Vault Mount Bracket.

  5. Insert the C-6602 Vault Mount Bracket into the Coin Vault.

  6. Feed the remaining harness ends through the combined C-5414 F2 Mounting Bracket.

  7. Secure the combined C-5414 F2 Mounting Bracket to the C-6602 Vault Mount Bracket with the C-0144 Screws.

Connect Power

 I-P0001

Part #: C-5602R1

Desc 1: Power Converter

Desc 2: SMT-012-018VW

   Qty: 1

Part #: C-5500

Desc 1: Power Extension Harness

Desc 2: 25.5"

   Qty: 1

Part #: C-5338

Desc 1: Power Adapter Harness

Desc 2: WCAD

   Qty: 1

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5338 Power Adapter Harness to the power distribution panel inside the machine or tapping as needed.

    1. 240vac- Connect Blue wire to the L1 tab, and the Brown wire to the L2 tab on the terminal block.

    2. Secure the green wire beneath the ground screw.

  2. Connect the opposite end of the C-5338 Power Adapter Harness to the C-5602 Power Converter.

  3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

 I-S0004

Part #: C-5253

Desc 1: Coin Sense Harness

Desc 2: 28"

   Qty: 1

  1. Disconnect the factor coin drop harness from the microswitch on the coin drop.

  2. Connect the C-5253 Coin Sense Harness to the microswitch on the the coin drop.

 I-S0006

Part #: C-5258

Desc 1: Coin Sense Harness (SA)

Desc 2: WCAD

   Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-5258 Coin Sense Harness to the harness connected to the Coin Drop.

 I-S0023

Part #: C-5382

Desc 1: Coin Sense Harness

Desc 2: Imonex EM100/EM3

   Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-5382 Coin Sense Harness to the harness connected to the Coin Drop.

 I-S0031

Part #: C-6253

Desc 1: Coin Sense Harness

Desc 2: 28"

   Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6253 Coin Sense Harness to the harness connected to the Coin Drop.

 I-S0034

Part #: C-6258

Desc 1: Coin Sense Harness (SA)

Desc 2: WCAD

   Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.

 I-S0050

Part #: C-6382

Desc 1: Coin Sense Harness

Desc 2: Imonex EM100/EM3

   Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

 I-T0038

Part #: C-5254

Desc 1: Machine Start Harness

Desc 2: Dexter Stack Dryer

   Qty: 1

  1. Connect the C-5254 Machine Start Harness to the P2 connector on the Machine Control Assembly.

 I-T0040

Part #: C-5256

Desc 1: Machine Start Harns (pulse)

Desc 2: 20" - Male taps, Rq. Female

   Qty: 1

  1. Connect the C-5256 Machine Start Harness to the harness previously connected to the coin switch on the Coin Drop.

Connect and Mount Reader

Machine Configuration

No special configuration required.

CCI Software Configuration

Machine ControlPulseSerial
A-Series (1.0)SingleVend (Relay) / 55ms*NOT SUPPORTED*

Additional Resources

  • No labels