...
Connect Coin Sense Harness
...
| KitID | 923 |
|---|---|
| KitDesc | Coin Drop - Factory Optical |
...
Disconnect the Coin Drop from the Machine Control Assembly.
Connect
...
Connect the Red connector to the Coin Acceptor connection, where the coin drop was previously connected, on the Machine Control Assembly.
Connect Machine Interface Harness
| Cci readerinstall kit | ||||
|---|---|---|---|---|
| ||||
|
Connect and Mount Reader
| Multiexcerpt include | ||||||
|---|---|---|---|---|---|---|
|
...
Feed remaining harness ends through the mounting hole.
...
Connect the free end of the C-0114-MLV Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.
...
(Coin and Card Installation Only) Connect the free end of the C-6332 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
...
Machine Configuration
| Multiexcerpt include | ||||||
|---|---|---|---|---|---|---|
|
...