Versions Compared

Old Version 6

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 7

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5101 Power Adapter Harness to the power distribution panel inside the machine.

  1. 120vac: Connect the brown and blue wires to connector #2 closest to outside of machine and #4 on terminal side closest to circuit board.

  2. 240vac: Connect the brown and blue wires to connectors 3 and 5 on the terminal side closest to the circuit board.

  3. Secure the green wire beneath the ground screw.

  • Connect the opposite end of the C-5101 Power Adapter Harness to the C-5602 Power Converter.

    • Cci readerinstall step
    componentPower
    Cci readerinstall kit
    KitID807
    KitDescChange Me

    Connect

    ...

    Connect Coin Sense Harness

    Cci readerinstall kit
    KitID716
    KitDescCoin Drop: Factory Edge Connector

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

    ...

    Cci readerinstall kit
    KitID655
    KitDescPulse - Edge Connector

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

    Cci readerinstall kit
    KitID830
    KitDescPulse - Terminal Connector with Block

    1. Attach the C-5313 Terminal Block to the Machine Control Assembly.

    2. Connect the C-5356 Machine Start Harness to the Positions 2 and 3 on the terminal block.

      Terminal block positions are numbered 0-6. Position 0 is closest to the board edge

      .

    Cci readerinstall step
    componentReader

    ...