Install Mounting Hardware
...
| KitID | 616 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-5700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
| KitID | 905 |
|---|---|
| KitDesc | Card Only - Card Model |
...
Place the C-5700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Connect
...
| KitID | 595 |
|---|---|
| KitDesc | Tap Machine Source Power |
...
120vac: Connect the blue wire to L1 and the brown wire to N.
240vac: Connect the blue wire to L1 and the brown wire to L2.
Connect the green wire to ground.
...
Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.
...
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.
Connect Coin Sense Harness
| Cci readerinstall kit | ||||
|---|---|---|---|---|
| Cci readerinstall kit | ||||
| ||||
| ||||
| ||||
|
...
| Cci readerinstall kit | ||||
|---|---|---|---|---|
| ||||
| ||||
| Cci readerinstall kit | ||||
| ||||
|