...
Install Mounting Hardware
...
| KitID | 584 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
| KitID | 906 |
|---|---|
| KitDesc | Card Only - Card Model |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
| KitID | 916 |
|---|---|
| KitDesc | Card Only - Coin Model w/ Rear Control Panel |
...
Remove existing coin box and coin drop.
...
Attach C-5760-A Alliance Adapter Bracket to C-6760 Metercase Bracket.
...
Mount C-6760 Metercase Bracket into the front of the metercase, inserting the two studs through the coin slot openings.
Secure to the metercase using (2) C-1059 Keps Nuts and (2) C-1070-W Washers.
Connect Power
...
| KitID | 595 |
|---|---|
| KitDesc | Tap 120v Machine Power |
...
120vac: Connect the blue wire to L1 and the brown wire to N.
240vac: Connect the blue wire to L1 and the brown wire to L2.
Secure the green wire to the ground wire.
...
Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.
...
Connect Coin Sense Harness
...