Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID980
KitDescSurface Mount
Optional: Remove existing payment device and cover opening usingC-0939BNA Cover Plate.Place theC-6700-TEMPDrill Template on the desired mounting location.IfC-0939 BNA Cover Plateis used, drilling mounting holes into the plate is recommended if able.
  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

  • Refer to
    1. Place the C-6700-TEMP Drill Template on the desired mounting location.

    2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

    3. Refer to

    for further instructions.
    Cci readerinstall kit
    KitID985
    KitDescPayment Device Bay
    1. Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.

    Connect Power

    Power is supplied through the same Machine Interface Harness described in step 4.

    Connect Coin Sense Harness

    Not applicable in this setup. FasCard reader does not collect payment from any other devices, and will only send funds to the machine's control.

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID839
    KitDescSerial
    1. Connect the C-6124-MDB Machine Start Harness to the MDB interface harness on the Machine Control Assembly.

      1. Optional: Use the pigtail MDB connector to reconnect any existing payment devices.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    Reader

    ...

    Cci readerinstall footer