Skip to end of banner
Go to start of banner

2075 Reader Install Guide

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

ERROR: Unable to connect to 'InstallRef' database.

Source: Microsoft OLE DB Driver for SQL Server
Number: -2147467259
Description: Cannot open database "CCI_InstallRef" requested by the login. The login failed.

Install Mounting Hardware

 I-M0174

Part #: C-6801

Desc 1: F2/F3 Reader Mounting Kit

Desc 2: Universal

   Qty: 1

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.

Connect Power

Power is supplied through the same Machine Interface Harness described in step 4.

Connect Coin Sense Harness

Not applicable in this setup. FasCard reader does not collect payment from any other devices, and will only send funds to the machine's control.

Connect Machine Interface Harness

 I-C0020

Part #: C-6124-MDB

Desc 1: Machine Start Harness

Desc 2: F2 MDB Interface Harness

   Qty: 1

  1. Connect the C-6124-MDB Machine Start Harness to the MDB interface harness on the Machine Control Assembly.

    1. Optional: Use the pigtail MDB connector to reconnect any existing payment devices.

Connect and Mount Reader

ERROR: Unable to connect to 'InstallRef' database.

Source: Microsoft OLE DB Driver for SQL Server
Number: -2147467259
Description: Cannot open database "CCI_InstallRef" requested by the login. The login failed.
  • No labels