...
Install Mounting Hardware
...
| KitID | 616 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-5700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
| KitID | 584 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Connect Power
...
| KitID | 595 |
|---|---|
| KitDesc | Tap Machine Power |
...
Connect the C-5210 Power Adapter Harness to the installed spade taps.
...
Connect the C-5210 Power Adapter Harness to the C-5602 Power Converter.
...
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
Connect
...
Power
...
Connect
...
Connect Coin Sense Harness
...
| KitID | 886 |
|---|---|
| KitDesc | Coin Drop: Coin Micro |
Disconnect the existing wires from the Coin Drop and connect the C-6334 Combination Coin/Start Harness to the Coin Drop.
...
Connect Machine Interface Harness
...
| KitID | 886 |
|---|---|
| KitDesc | Pulse - Coin Micro |
Disconnect the existing wires from the Coin Drop.
...
Harness
...
Connect the Violet wires to Blue wires 36 & 35.
...
White wires wrapped with Violet go to Red wires 207 & 30.
White wires wrapped with Blue go to Brown coin blocking solenoid wires.
...
| Cci readerinstall step | ||
|---|---|---|
| ||
...