...
Install Mounting Hardware
...
KitID | 584 |
---|---|
KitDesc | Coin and Card |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Cci readerinstall kit | ||||
---|---|---|---|---|
| ||||
|
Connect Power
...
KitID | 595 |
---|---|
KitDesc | Spade Tap Power Converter |
...
Use the C-5101 Spade Taps on the incoming power.
Tap the black L1 wire.
Tap the white N wire.
Tap the green G wire.
Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:
Connect
...
Connect the brown wire to the white N wire.
...
Connect the green/yellow wire to the green G wire.
...
Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.
...
Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500 Power Extension Harness.
Connect Coin Sense Harness
Connect Machine Interface Harness
...
KitID | 658 |
---|---|
KitDesc | Serial Communication Harness |
...
Harness
...
Connect and Mount Reader
Machine Configuration
...