...
Install Mounting Hardware
...
| KitID | 584 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Connect Power
...
| KitID | 802 |
|---|
...
Connect
...
Power
...
Connect Coin Sense Harness
| Cci readerinstall kit | ||||
|---|---|---|---|---|
| ||||
|
Connect Machine Interface Harness
...
...
Connect
...
Connect and Mount Reader
...
Reader
...
- Feed remaining harness ends through the mounting hole as described in the F2/F3: FasCard Reader Mounting Guide.
- Connect the free end of the C-5256 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
- Connect the free end of the C-6253 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
- Connect the free end of the C-5500-60 Power Harness to port 1.
- Secure the FasCard reader to base as described in the FasCard Mounting Guide.
Machine Configuration
...
Fascard Admin Site Configuration
Use the following settings depending on the Machine Start Harness used.
Pulse (C-5256)
Equipment Type: SingleVend
Pulse Length: 500
| Cci readerinstall footer |
|---|