...
Install Mounting Hardware
...
| KitID | 584 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
| KitID | 906 |
|---|---|
| KitDesc | Card Only - Card Models |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Connect Power
...
| KitID | 595 |
|---|
...
120vac: Tap and connect the blue wire to L1 and the brown wire to N.
240vac: Tap and connect the brown and blue wires to connectors L1 and L2 wires.
Tap and connect the green wire to the ground wire.
Connect
...
Power
...
Connect
...
Connect Coin Sense Harness
Connect Machine Interface Harness
...
| KitID | 658 |
|---|---|
| KitDesc | Serial |
...
Connect and Mount Reader
Machine Configuration
...