Versions Compared

Old Version 11

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall step
componentMounting

Remove the (4) security torx retaining screws on the front of the machine.
Remove the soap tray by pulling it out and pressing on the retaining tab in the rear of the tray.
Locate and remove the (2) security torx screws inside the soap tray opening.
Remove the final (2) torx screws to open the top cover.

  • Locate a spot on top of the machine to mount the reader. Verify included harnesses will reach desired location without encountering interference from internal machine components. Mark the location using C-6700-TEMP Drill Template.

    • Refer to F2 Reader Mounting Guide for instructions on drilling mounting holes and mounting the reader.
    cci-readerinstall-kit
    KitID906
    KitDescCard Only - Card Model
    cci-readerinstall-step
    componentPower

    Cci readerinstall step
    componentCoin Sense

    ...