Versions Compared

Old Version 7

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 8

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Warning

Custom Install Scenario

This install guide has been created and intended only for use at FasCard account F0913, where a previous card system is being replaced.

C-5358 coin sense harness is being sent in place of the standard coin sense harness as the previous card system spliced into the coin drop harness.

Cci readerinstall header

Install Mounting Hardware

...

KitID917
KitDescCoin and Card

...

Place the C-5700-TEMP Drill Template on the desired mounting location.

...

Verify included harnesses will reach desired location without encountering interference from internal machine components.

...

Connect Power

...

KitID595

...

Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

...

Connect Coin Sense Harness

Cci readerinstall kit
KitID690
KitDescCoin Drop: Factory

  1. Disconnect the Coin Drop from the previous card reader.

  2. Connect the C-5358 Coin Sense Harness to the harness connected to the Coin Drop.

    1. Connect the White wire from the coin drop to the White wire terminal on C-5358.

    2. Connect the Green wire from the coin drop to the Green wire terminal on C-5358.

    3. Connect the Brown wire from the coin drop to the Brown wire terminal on C-5358.

...