Page Comparison

This page includes the configuration and setup information required for full utilization of the LaundryCard firewall, including credit card processing and remote operator access.

...

1. The router must be set up to have a single ethernet interface for connection to Port 1 of the LaundryCard Firewall.
2. A single fixed (static) IP address must be designated for use by the LaundryCard Firewall.
3. Port Forwarding must be enabled and implemented such that traffic received from the internet and destined to the LaundryCard Firewall static IP address will be forwarded as follows:
   1. The router will forward all TCP traffic with several specific TCP ports to the designated Ethernet interface connected to the LaundryCard Firewall.
   2. The router will forward all UDP traffic several specific UDP ports to the designated Ethernet interface connected to the LaundryCard Firewall.
   3. The router will forward all GRE traffic (protocol 47) to the designated Ethernet interface port connected to the LaundryCard Firewall.
   4. The router will forward all IPSEC-ESP traffic (protocol 50) to the designated Ethernet interface port connected to the LaundryCard Firewall.
4. All traffic from the LaundryCard Firewall must be forwarded by the router to the modem interface on the router.

Port and Protocol Usage

The following is current list of protocols and port usage of the LCRF (LaundryCard Router/Firewall). 

...