| Cci readerinstall kit |
|---|
| KitID | 603 |
|---|
| KitDesc | Serial - MDC / Quantum Gold Controls |
|---|
|
Pulse Setup Connect the C-0110-TOP Machine Start Harness to the H5 connection on the Machine Control Assembly. C-0110-CP Jumper Plug is not used, but can be retained in case of future serial communication usage usage.
Serial Setup Connect the C-0110-TOP Machine Start Harness to the H5 connection on the Machine Control Assembly. Connect the C-0110-CP Jumper Plug to the H2 connection on the Machine Control Assembly.
|
Connect Machine Interface Harness
| Cci readerinstall kit |
|---|
| KitID | 603 |
|---|
| KitDesc | Serial or Pulse |
|---|
|
Connect the C-0110-TOP Machine Start Harness to the H3 connection on the Machine Control Assembly.
|
Machine Configuration
If using serial configuration, install the C-0110-CP Jumper Plug in the H6 connection on the Machine Control Assembly to put the machine into card mode.