Page Comparison

...

Multiexcerpt

MultiExcerptName	Titanium Configuration (TLW)

Enter Manual Mode by opening the service door and closing the coin vault switch. Then press the following two buttons based on the control:
Quantum Gold Pro (T4)
MDC II (T1)
Regular & Normal
Normal Hot & Perm Press Warm
rAPid will be displayed on the control. Select the Prog option and then configure the following settings:
1. Serial Payment Configuration (SErPAY): Card
2. Card Enable (CArdEn): On
Exit Manual Mode.

...

Multiexcerpt

MultiExcerptName	MayTag Gen1 MLV+ Pulse

Excerpt

name	MayTag Gen2 Serial

Enhanced Debit is self-selected when a Generation 2 card reader is installed in the dryer. The Ed option cannot be manually selected or deselected.

LaundryLux / Electrolux

Multiexcerpt

MultiExcerptName	Encore - FLW

Press the Service Switch to enter Service Mode. The display will go blank.
Press the Heavy Soil and Extra Rinse buttons simultaneously. The display will show either "0 00" if in coin mode and "1 00" if in card mode.
If in coin mode, press the Start button. The display will begin flashing.
Press the Cold button to change the left-most digit from "0" to "1".
Press the Start button. The display will stop flashing.
Press the Service Switch to exit Service Mode.

Multiexcerpt

MultiExcerptName	MayTag Gen2 Serial

Enhanced Debit is self-selected when a Generation 2 card reader is installed in the dryer

The Ed option cannot be manually selected or deselected.

Multiexcerpt

MultiExcerptName	LG Giant-C (Pre 1.8/WiFi 2.0)

Enter Programming Mode on the machine.

Card Model	Coin Model	OPL Model
Insert service card. Display will show L9C1.	Dissemble upper coin box key. Take out the coin drop from the coin box. Turn on/off the toggle switch at the back of the coin box. Display will show L9C1.	Push the 1st & 3rd button at the same time. Push the 2nd button 3 times. Push the START button. Display will show L9C1.

...