...
Add each new piece of equipment and complete the fields below. Selecting Save will save the information and bring up the same screen with blank fields to enter the next equipment type. See the chart of field and descriptions for reference.
Field | Descriptions |
---|---|
Control | |
Equipment Name | Brand Name of Equipment |
Equipment Type | 1 = Washer 2 = Dryer See last row in chart for full list of type descriptions |
Free Dry Awards | Number of free dry awards allowed on this machine |
Vend Price | The cost of this machine for each start |
Bonus Allowed | When checked, Bill Bonus allowed on this machine |
Discount Allowed | When checked, percentage discount is allowed on this machine |
W2W Points Allowed | When checked, machine allows customer to accumulate Wash to Win points |
Start Hours | The time the machine can be used |
End Hours | The time the machine is no longer available to be used |
Cycle Time | The length of each cycle on the machine |
Pulse Length | |
Door Sensor | |
Equipment Types | 1 = Washer 2 = Dryer 4= Vending 5= Door 6 = Door Attendant 7 = Door Employees 10 = Other 100+ = Secure Machine |
Note |
---|
For more information regarding the Configuration module refer to the LaundryCard Installation Guide. |
Note |
---|
The configuration pages can only be accessed from the X-Changer, not available remotely. |
Machine Reader Setup
Select System Setup.
Select Card Reader Setup
...
.
The readers will be temporarily stopped for configuration.
Field | Description |
---|---|
Card Reader Address | |
Line Number | |
Equipment Type ID | |
Date in Service |
When finished, click Back and then Done.
Warning |
---|
Entering the config module will stop all card readers from accepting cards, and preventing new equipment starts! |