Page Comparison

...

• Use the layer labeled 'Back'.
• Artwork must be contained within the marked area designated by the layer labeled 'Printable Area - Back'.
• Solid colors only (No use of opacity or gradients.).

• Use of black color only.

  Ui expand
  title Example

...

• To utilize the back side of the card, the area for card number and PIN must be incorporated into the front side artwork (Make visible the 'Card Number / PIN' layer to preview the location where the numbers will be printed.). Otherwise the back side of the card must remain blank for the card number and PIN.
• Artwork must be contained within the marked area designated by the layer labeled 'Printable Area - Back'.
• Use the layer labeled 'Back'.
• Solid colors only (No use of opacity or gradients.).

• Use of black color only.

  Ui expand
  title Example

...

• Artwork must be contained within the marked area designated by the layer labeled 'Printable Area - Front'.

• Solid colors only (No use of opacity or gradients.).

• One color of customer's choice from available color selection.

  Ui expand
  title Color Pallet

  Ui expand
  title Example

...

• Artwork must be contained within the marked area designated by the layer labeled 'Printable Area - Back'.
• Use the layer labeled 'Back'.
• Solid colors only (No use of opacity or gradients.).

• Use of black color only.

  Ui expand
  title Example

...

• Artwork must be contained within the marked area designated by the layer labeled 'Printable Area - Back'.
• Use the layer labeled 'Back'.
• Solid colors only (No use of opacity or gradients.).

• Use of black color only.

  Ui expand
  title Example

...

• Artwork must be contained within the marked area designated by the layer labeled 'Printable Area - Back'.
• Use the layer labeled 'Back'.
• Solid colors only (No use of opacity or gradients.).

• Use of black color only.

  Ui expand
  title Example

...

1. 1. 1. Hide all 'Printable Area -' layers.
      2. Save file as:
         1. Front: '(Insert Account ID)_Master.psd'
         2. Back: '(Insert Account ID)B_Master.psd'

PDF Approval Form - One for the per project.

1. 1. 1. Insert applicable JPG preview files.
      2. Size and position JPG previews in respected locations using pre-set document guides.
      3. Fill 'Customer ID #' field with account number.
      4. Fill 'Color Process' field following these guidelines:
         

         1. If customized card type - 'Customized - # Color Process' where '#' is the number of spot colors used (Do not include backside artwork for # of spot colors.) or 'Full CMYK' for full color artwork.

         2. If personalized card type - 'Personalized - #' where '#' is the color use for the artwork. 

      5. Save as .PDF with layers disabled and using 'CCI_PDF_Card_Artwork_Proof' preset if using Adobe software. If non-Adobe software is used create the smallest file size while retaining at least 150 PPI for images.
         1. LaundryCard - file name is 'C-2### APPROVAL'. Where the '###' is the numeric characters from the customer's ID number.
         2. FasCard - file name is 'F#### APPROVAL'. Where the '####' is the numeric characters from the customer's ID number.

...