...
- Set multi-meter to DC mode
- Connect black probe to green orange pin
- Connect red probe to orange green pin
- Verify that multi-meter displays 12V
Wiring Reference
| Pin Location | CCI Wire Color | 12VDC Connections | Operations Guide |
|---|---|---|---|
| 1 | Orange | 0V | Source Voltage |
| 2 | Green | 12VDC | |
| 3 | COMMON | Vend Switch 30ms or longer switch closure to vend card | |
| 4 | NORMALLY OPEN | ||
| 5 | LIT BUTTON / LAMP | READY-TO-VEND SIGNAL Enables a lamp to be lit when unit is ready to dispense cards | |
| 6 | 5VDC | ||
| 7 | NORMALLY OPEN | RESET SWITCH | |
| 8 | COMMON | ||
| 9 | LIT BUTTON / LAMP | RESET & JAM SIGNAL Enables a lamp to be lit when card has not been dispensed. If a card jams, or fraud is experiences, a flashing output will occur. | |
| 10 | 5VDC | ||
| 11 | LIT BUTTON / LAMP | DISPENSER EMPTY SIGNAL | |
| 12 | 5VDC |
...