...
- Insert Manager's card to Backup X-Changer and click the Shutdown button.
Select Reboot this Machine and click Go.
Version 6: DO NOT UNCHECK AUTO START!
Version 6
- A message will appear for confirming the action, press OK to continue.
- After the LaundryCard program closes, it leaves another window to finally confirm the reboot. Press OK. This will take between 5 and 7 minutes.
The Backup computer will shut down and reboot. During this time, the Primary X-Changer and washer/dryers may appear to be frozen/unusable. This is normal behavior and will "free up" once the Backup computer has finished. Also, a network error will appear on the Primary X-Changer This is normal because it recognizes the Backup is offline. Once the Backup has finished and returned to the welcome screen, a WCRD error will appear on it. Again, this is a normal while the Backup re-connects to all readers in the store. Once all red lines have disappeared, walk around and verify the card readers appear normal, then proceed to Reboot Primary.
Warning After the backup completes its reboot, check system messages. If new errors have appeared, wait 5 minutes for them to clear automatically. DO NOT restart the Primary X-Changer. Call CCI support for further assistance if necessary.
Anchor failover failover
...
Reboot Primary
- Insert Manager's card to Primary X-Changer and click the Shutdown button.
Select Fail over to Backup and click Go.
- Version 6: DO NOT UNCHECK AUTO START!
- A message will appear for confirming the action, press OK to continue.
- After the LaundryCard program closes, it gives a notification that the database backup is complete, and finally confirms the reboot. Press OK on both windows. Notice how after a few minutes, the Primary is now the opposite X-Changer. This indicates a successful fail over.
...