| Ui tab |
|---|
| If the system to be rebooted is Database Backupinstall-stepsINLINEStep 1 - Initiate RebootC-2MANAGECARDHeightfalsefalsetrue - Insert Manager's card into Backup X-Changer and click the Shutdown button.
- Choose the appropriate button to reboot the Backup X-Changer.
Step 2 - Confirm Reboot- Windows will prompt for confirmation of reboot. Click OK to confirm.
If the system to be rebooted is Database Primaryinstall-stepsINLINEStep 1 - Perform FailoverC-2MANAGECARDHeightfalsefalsetrue - Insert Manager's card into Primary X-Changer and click the Check Messages button. Verify no database backup errors are present.
- If database backup errors are present, contact Technical Support before proceeding.
- Click the Back button.
- Click the Shutdown button.
- Choose Failover to Backup.
Step 2 - Confirm Reboot- KeepAGoin will display a popup indicating a database backup has been completed. Click OK to confirm.
Windows will prompt for confirmation of reboot. Click OK to confirm.
|
| Ui tab |
|---|
| Required Hardware- USB Keyboard
- Mouse or touch screen
If system to be shutdown is Database BackupInstructions1. Connect install-stepsINLINEStep 1 - Access Start MenuConnect the keyboard to an available USB port on the computer and press the Windows key located along the bottom row.
2. A Start menu will appear at the bottom left corner of the screen. Using the touch screen or a mouse, click Shut Down.
3. A
Step 2 - Confirm ShutdownA window appears which allows log off, restart, or shut down. Select the desired option then click OK. Wait for computer to shutdown. All lights on the front of the computer should turn off and the monitor will go blank.
If system to be shutdown is Database PrimaryUsing a manager or attendant card, verify that no database backup errors exist on the Check Messages page.install-stepsINLINEStep 1 - Perform FailoverC-2MANAGECARDHeightfalsefalsetrue - Insert Manager's card
to - into Primary X-Changer and
click the Shutdown button.LaundryCard Versions 5 and 6: Select Failover to Backup and click Go. Version 6: Do not uncheck Auto Start.LaundryCard Versions 7 and 8: Select Failover to Backup. | After this step is completed, the computer will shut down and restart. During this time, the original Backup X-Changer will become the new Primary X-Changer and may display a network connection error or experience a slow-down until the original Backup X-Changer has restarted. - Click OK when prompted.
- A database backup will be performed. Click OK when prompted by the completion notification.
- After the LaundryCard program closes, another prompt will appear to confirm restarting Windows. Click Cancel.
1. Connect - click the Check Messages button. Verify no database backup errors are present.
- If database backup errors are present, contact Technical Support before proceeding.
- Click the Back button.
- Click the Shutdown button.
- Choose Failover to Backup.
Step 2 - Cancel Reboot- KeepAGoin will display a popup indicating a database backup has been completed. Click OK to confirm.
Windows will prompt for confirmation of reboot. Click Cancel.
Step 3 - Access Start MenuConnect the keyboard to an available USB port on the computer and press the Windows key located along the bottom row.
2. A Start menu will appear at the bottom left corner of the screen. Using the touch screen or a mouse, click Shut Down.
3. A
Step 4 - Confirm ShutdownA window appears which allows log off, restart, or shut down. Select the desired option then click OK. Wait for computer to shutdown. All lights on the front of the computer should turn off and the monitor will go blank.
|
|