Page Comparison

Section

Column

width	30

Panel

Table of Contents

exclude	Overview

Column

width	70

Panel

Overview

This page provides information on the FasCard Touch Kiosk, including electrical requirements, unit specifications, and mounting instructions.

Touch Kiosk Specifications and Requirements

FasCard Touch Kiosk

Tip
Unit dimensions and power requirements can be found in this section. Unpacking and mounting instructions are found below.

The FasCard Touch Kiosk can be mounted in or on an existing wall or can be pedestal mounted. It offers customers a convenient way to view and manager their Loyalty account, add balance to an existing card, or obtain a new card.

Kiosk Dimensions

	Touch Kiosk	Touch Kiosk Drawer	Kiosk Pedestal Spacer	Kiosk Pedestal
	Image Modified	Image Modified	Image Modified	Image Modified
Part #:	C-5610	C-5623	C-5626	C-5628
Desc:	Main Kiosk body- can be pedestal or wall mounted.	Drawer addition to main Kiosk body- can be pedestal or wall mounted.	Kiosk pedestal spacer- not required for wall mount.	Kiosk pedestal- not required for wall mount.

Width (A)Height (B)Depth (C)13 3/4"20 1/4"20 1/4"

Electrical Requirements: 120/60/1 Isolated Circuit

Gross Weight:

Shipping Weight:

Suggested mounting height: 39" from bottom of cabinet to floor

Info
Check local ADA requirements before mounting.

Full Kiosk Dimensions

Technical Specifications

CPU: Intel Atom D2550 1.86Ghz

Memory: 4GB DDR3

Hard Drive: 32GB Cfast SATA

Networking: Wireless "N" PCI-e; 10/100 Ethernet

Display: 1024X768 10.4" LCD Multi-Touch

Electrical Requirements

Warning
Always follow local electrical codes.

The FasCard Touch Kiosk operates on 120vac and comes with a standard 12' grounded power cord. The bottom of the base has a 1/2" knock out that can be used to mount a standard 120vac power outlet inside the base. Additional holes may be drilled to accommodate other conduit sizes. Card Concepts Inc. recommends using an outlet with an isolated ground and that an Uninterruptible Power Supply (not included) be used to protect the kiosk from power fluctuations and outages.

Unpacking and Mounting the Touch Kiosk

Tip

The Touch Kiosk is packaged in a corrugated shipping assembly with an upper and lower tray as well as a protective front panel and shipping carton.

Ui expand

title	Unpacking the Touch Kiosk - Step by Step

Ui steps

Ui step
Carefully cut and remove the shipping straps securing the Touch Kiosk to the shipping pallet. Carefully cut the packing tape from the top of the shipping carton and remove it. Remove the lock handle envelope. This envelope contains the locks, keys, and lock handle.

Ui step
Card Concepts Inc. recommends using a two-person team lift when moving the Touch Kiosk by hand. Lift the shipping carton off of the kiosk. Remove the upper cardboard tray and protective front spacer. Remove the plastic bag. Remove the kiosk from the lower tray.

Ui step

Once all packaging is removed, the kiosk can now be opened by inserting the lock handle and rotating counter-clockwise until the bolt disengages.
- Rear door opens by swinging outward.
- Front door slides forward on track.
Use the power cord contained within the Touch Kiosk housing to power the kiosk.
Store the keyboard in a safe place on location and do not connect to the kiosk unless requested to do so by Technical Support.