Versions Compared

Old Version 4

changes.mady.by.user Steve Marcionetti

Saved on

compared with

New Version 5

changes.mady.by.user Steve Marcionetti

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

 

Multiexcerpt
MultiExcerptNameRecommended Tools and Supplies
DescriptionLink/SourceImage
Champion CT7-1-1/8 Tungsten Carbide Tipped
1-1/8-Inch Hole Cutter-1-Inch Thick Metal
(Or Equivalent)

Amazon

9/64" Drill Bit
For drilling stainless steel		Amazon
Cutting OilAmazon
Heavy Duty Professional 3/8" Magnesium Drill
with #2 drill tip extension.
(Or Equivalent)		Harbor Freight
Right Angle Drill Attachment
(Or Equivalent, used on some dryer installs) 		Amazon
Center Punch
(Or Equivalent)		Amazon
HammerAmazon
Pliers
(Or Equivalent)		Amazon
No.2 Phillips Screwdriver
(Or Equivalent) 		Amazon
3/32" Head Allen Hex Screwdriver
(Or Equivalent) 		Amazon
Fine Point Sharpie Marker
(Or Equivalent)		Amazon
Tape Measure
(Or Equivalent)		Amazon
Cable Ties
(Or Equivalent)		Amazon
Electrical Tape
(Or Equivalent)		Amazon
FasCard Drill Template
*Included with Satellite Install Kit		CCI
 

Assumptions

 

Multiexcerpt
MultiExcerptNameAssumptions

This document assumes the installer has a working knowledge of hand tools and of the target machine in question.  It is recommended that instructions herein be performed by individuals who are qualified to perform these tasks.  CCI takes no responsibility for the accuracy of this document, or for any damage that may occur to the target machine.

This document assumes the following items have been acquired and are not apart of the installation kit.

 

 

Install Guide

 

Multiexcerpt
MultiExcerptNameWarning
#fdaaaa#ea4e4eWARNINGRed1
  • Always make sure that the power is turned off to target machine before starting installation
     
  • Always take precautions to protect eyes and hands when performing installation
Multiexcerpt
MultiExcerptNameNote
#f9fbbd#edefae! NOTE !#dbe3021

Images in this document may not match the exact machine for which the instructions are designed for and are used to help describe procedures