...
| Class | toc-header |
|---|
...
| Column | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| |||||||||
|
...
| width | 70 |
|---|
...
Overview
Card reader programming varies depending upon card reader model. Select the appropriate tab below, based upon card reader model number.
...
Programming Instructions
...
Items Needed
| Program Card (C-2PROGRAM) | Card Reader (C-0101, C-0102, C-0103) |
|---|---|
|
|
Programming Instructions
Programming Steps
- Identify desired unit address for card reader.
- Power cycle card reader.
- Insert Program card, reader will display:
Set Address: 0**
Dip Card to Set - To increase current digit: Insert tip of card and remove quickly.
- To move to next digit: Insert card fully and wait (approx 2 seconds).
- After accepting last digit of unit address, reader will display:
Storing Value
Remove Card Now
Video Tutorial
...
| Multimedia |
|---|
...
| title | Dip Switch Programming |
|---|
Items Needed
...
Programming Steps
...
Dip Switch Values
Each switch has a value associated with it, as shown in the table below. Turning switches ON causes their values to be added together.
Switch 1 | Switch 2 | Switch 3 | Switch 4 | Switch 5 | Switch 6 | Switch 7 | Switch 8 |
|---|---|---|---|---|---|---|---|
128 | 64 | 32 | 16 | 8 | 4 | 2 | 1 |
...
|