/
How to Program the address on a Laundrycard Reader

How to Program the address on a Laundrycard Reader

Overview

Card reader programming varies depending upon card reader model.  Select the appropriate tab below, based upon card reader model number.

Items Needed

Program Card (C-2PROGRAM)

Card Reader (C-0101, C-0102, C-0103)

Program Card (C-2PROGRAM)

Card Reader (C-0101, C-0102, C-0103)

Programming Instructions

Programming Steps

  1. Identify desired unit address for card reader.

  2. Power cycle card reader.

  3. Insert Program card, reader will display:
    Set Address: 0**
    Dip Card to Set

  4. To increase current digit: Insert tip of card and remove quickly.

  5. To move to next digit: Insert card fully and wait (approx 2 seconds).

  6. After accepting last digit of unit address, reader will display:
    Storing Value
    Remove Card Now

Video Tutorial

Related content

Card Reader Programming Instructions
Card Reader Programming Instructions
More like this
How-to enable Card Reader Communications (Card Mode) on Machines
How-to enable Card Reader Communications (Card Mode) on Machines
Read with this
Card Reader Setup (Equipment/Machine Setup)
Card Reader Setup (Equipment/Machine Setup)
More like this
LaundryCard X-Changer Cabinet v2 Parts Manual - Current
LaundryCard X-Changer Cabinet v2 Parts Manual - Current
Read with this
Card Reader Connections
Card Reader Connections
More like this
FasCard F1 Reader Field Replaceable Components
FasCard F1 Reader Field Replaceable Components
Read with this