Versions Compared

Old Version 1

changes.mady.by.user Brett Norrell

Saved on

compared with

New Version Current

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID744
KitDesc30lb & Smaller Models

  1. Remove existing coin box and coin drop.

  2. Install the C-0928 Mounting Bracket over the coin vault and coin drop opening. Secure to the machine using the C-1059 kep nuts.

Cci readerinstall kit
KitID743
KitDesc40lb Plus Models

  1. Remove existing coin box and coin drop.

  2. Install the C-0934 Mounting Bracket over the coin vault and coin drop opening. Secure to the machine using the C-1059 kep nuts.

Connect Machine Interface Harness

Cci readerinstall kit
KitID627
KitDescPulse
  1. Connect the C-0126R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.
Cci readerinstall kit
KitID814
KitDescSerial
  1. Connect the C-0126-MLV Machine Start Harness to the RS-232 port on the Machine Control Assembly.
  2. Connect the C-5359 Machine Start Harness to the Input 1 port on the Machine Control Assembly.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptcom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@7627108f
MultiExcerptNameLC Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through mounting bracket.
  2. For serial setups:
    1. Connect the free end of theC-5359Machine Start Harnessto port 1 (Serial Connection Port) as shown in the image above.
    2. Connect the free end of theC-0126-MLVMachine Start Harnessto port 2 (Pulse Connection Port) as shown in the image above.
  3. For coin pulse setups:
    1. Connect the free end of theC-0126R1Machine Start Harnessto port 2 (Pulse Connection Port) as shown in the image above.
  4. Connect the the Cat5 cables running to and from the adjacent machinesto ports labeled 3 (Line Connection Ports) as shown in the image above.

  5. Secure the LaundryCard reader to the bracket using included hardware.

Machine Configuration

TODO

Cci readerinstall footer