Versions Compared

Old Version 14

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

cci-readerinstall-kitstep
KitID581
KitDescACA Controls

  1. Connect the C-6204-40 12VDC Power Harness to the H10 Connection on the Machine Control Assembly.

  2. Connect the green wire to a chassis ground.

  3. The remaining end (3-pin molex) connects directly to the rear of the F2 FasCard Reader.

Connect Coin Sense Harness

componentMounting

cci-readerinstall-kitstep
KitIDcomponent700
KitDescFactory Standard Coin Drop

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.

Power

cci-readerinstall-kitstep
KitID704
KitDescFactory Standard Coin Slide

  1. Locate the micro switch on the coin slide assembly for the upper pocket.

  2. Disconnect the harness connected to the microswitch and connect C-6253 Coin Sense Harness to the spade tabs on the micro switch.

Connect Machine Interface Harness

componentCoin Sense

Connect the C-5300-NC Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.
cci-readerinstall-kitstep
KitID645
KitDescPulse - Coin Connection
componentStart

Cci readerinstall step
componentExtras

...