Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Classtoc-header

...

width30
Panel

...

borderColor

...

#416eb6

...

titleColor

...

#e6e6e6

...

titleBGColor

...

width70
#416eb6
titleOverview

This page is intended to guide the

...

reader through the

...

Cellular Options

...

sizemedium
typewarning

various cabling configurations available when using a Cellular Modem Router (CMR) on the FasCard system. 

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameContactUs
PageWithExcerptCCIDOC:_Contact Us

Required parts

Bw part list
PartsC-1491,C-1496-V2,C-5605
ShowDesc3false

  • Cat5/5e Ethernet cables (of appropriate lengths) 
    • Must have between one or seven cables, depending on configuration. 

Optional hardware

  • ISP modem/router
  • Network switch

Cellular options

Warning
titleCMR use policy

CCI Cellular Service is intended for FasCard products only. Connecting any non-sanctioned device will result in suspension of service.

The FasCard Cellular Network offers two network-use configurations.

...

Operators may utilize a FasCard CMR (cellular modem-router) as

...

the primary source for internet connection or as a

...

backup to conventional internet access

...

.

...

More information regarding service mode and data plans can be found on the FasCard Cellular Service Plan and Hardware Information page.

Network

...

configuration

Operators utilizing a FasCard CMR device must configure their network according to the

...

one of the diagrams on the right-side. There are three primary and three alternate configuration options are available, dependent

...

on intended network usage.

...

...

  • Diagram 1 (top-left) – This diagram illustrates the standard FasCard network configuration (using Power-Over-Ethernet) when using the FasCard Cellular Network as a backup to conventional internet.  
  • Diagram Alt 1 (mid-left) – This diagram illustrates the FasCard network configuration (using an AC

...

  • adapter for the SAP) when using

...

  • the FasCard Cellular Network as a backup to conventional internet.  
  • Diagram

...

  • 2 (top-right) – This diagram illustrates the standard FasCard network configuration (using Power-Over-Ethernet) when using the FasCard Cellular Network as the primary internet

...

  • source.

...

  • Diagram Alt 2

...

  • (mid-right) – This diagram illustrates the FasCard network configuration (using an AC

...

  • adapter for the SAP) when using

...

  • the FasCard Cellular Network as the primary internet

...

  • source.
  • Diagram 3 (bottom-left) – This diagram illustrates the FasCard network configuration (

...

  • using Power-Over-Ethernet) when using the FasCard Cellular Network as a backup to conventional internet

...

  • with two

...

  • SAPs and a network switch.
  • Diagram Alt 3

...

  • (bottom-right) – This diagram illustrates the standard FasCard network configuration (using Power-Over-Ethernet) when using the FasCard Cellular Network as

...

  • the primary internet

...

  • source with two

...

  • SAPs and a network switch. 


Tip
titleTechnical

...

configuration

Additional technical configuration

...

may be required

...

Additional Information

...

after installation. Please call CCI Technical support to verify functionality. 

Drawio
bordertrue
viewerToolbartrue
fitWindowfalse
diagramNameLTE Network Diagrams
simpleViewerfalse
width
diagramWidth897
revision16

Documentation

Section
Column
width50%
Panel
titleFasCard documentation

Filter by label (Content by label)
showLabelsfalse
max25
showSpacefalse
sortmodified
reversetrue
excludeCurrenttrue
cqllabel in ("cmr","satellite","sap") and space = "LCE" and type = "page"

Column
width50%
Panel
titleKnowledge Base articles

Filter by label (Content by label)
showLabelsfalse
max25
showSpacefalse
sortmodified
reversetrue
excludeCurrenttrue
cqllabel in ("cmr","satellite","sap") and label in ("kb-how-to-article","kb-informational-content") and space = "KB" and type = "page"