Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitIDcomponent584
    KitDescCoin and Card
    Mounting

    cci-readerinstall-kit
    KitID869
    KitDescCard Only

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 Bracket on to the C-6920R1 Vault Bracket using C-5420 Screws.

    3. Install the C-6920R1 Vault Bracket in to the coin vault and drop opening. Secure into place using C-1059 Kep Nut.

    ...

    step
    componentPower

    Tap power as described in the document using theC-5101Spade Taps provided.Connect theC-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to theC-5602 Power Converter.Connect theC-5500-84 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.
    cci-readerinstall-kit
    KitID794

    ...

    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID716
    KitDescCoin Drop: Edge Connector
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.
    Cci readerinstall kit
    KitID725
    KitDescCoin Drop: Factory
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6389 Coin Sense Harness to the harness connected to the Coin Drop.
    Cci readerinstall kit
    KitID889
    KitDescCoin Drop: Keltner KR-1000
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the male 6-pin connection on the C-6379 Combination Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5353R1 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.
    Cci readerinstall kit
    KitID655
    KitDescPulse - Edge Connection
    step
    componentStart

    cci-readerinstall-kitstep
    KitID889
    KitDescPulse - Keltner KR-1000
    1. Connect the female 6-pin connector of the C-6379 Combination Harness to the machine harness previously connected to the Keltner coin drop.
    Cci readerinstall kit
    KitID623
    KitDescPulse - Rotary Timer
    1. Connect the C-0119R1F Machine Start Harness to the 6-pin start harness coming from the Machine Control Assembly.
    Cci readerinstall kit
    KitID666
    KitDescPulse - Set-O-Matic
    1. Connect the C-5388 Machine Start Harness to the connection the Set-O-Matic coin drop was previously connected to.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    Machine Configuration

    ...

    componentReader

    Cci readerinstall footer