Install Mounting Hardware
| cci-readerinstall-kitstep |
|---|
| KitIDcomponent | 584 |
|---|
| KitDesc | Coin and Card |
|---|
| Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions.
...
| cci-readerinstall-kit |
|---|
|
Tap power as described in the document using theC-5101 Spade Taps provided.Connect theC-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to theC-5602 Power Converter.Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.
...
| cci-readerinstall-kitstep |
|---|
| KitID | 704 |
|---|
| KitDesc | Coin Drop: Factory |
|---|
|
- Disconnect the Coin Drop from the Machine Control Assembly.
- Connect the C-6253 Coin Sense Harness to the Micro Switch on the Coin Drop.
|
Connect Machine Interface Harness
| cci-readerinstall-kit |
|---|
|
- Connect the C-5256 Machine Start Harness to the Coin Harness previously connected to the Micro Switch on the coin drop.
|
Connect and Mount Reader
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | CCIDOC |
|---|
| MultiExcerptName | F2 Reader |
|---|
| PageWithExcerpt | _Reader Ports |
|---|
|
...
- Feed remaining harness ends through the mounting hole as described in the F2/F3: FasCard Reader Mounting Guide.
- Connect the free end of the C-5256 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
- Connect the free end of the C-6253 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
- Connect the free end of the C-5500-60 Power Harness to port 1.
- Secure the FasCard reader to base as described in the FasCard Mounting Guide.
Machine Configuration
...
Fascard Admin Site Configuration
Use the following settings depending on the Machine Start Harness used.
Pulse (C-5256)
Equipment Type: SingleVend
Pulse Length: 500