Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID980
    componentMounting

    Optional: Remove existing payment device and cover opening usingC-0939BNA Cover Plate.Place theC-6700-TEMPDrill Template on the desired mounting location.IfC-0939 BNA Cover Plateis used, drilling mounting holes into the plate is recommended if able.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID985
    KitDescPayment Device Bay

    ...

    componentPower

    Power is supplied through the same Machine Interface Harness described in step 4.

    ...

    Cci readerinstall step
    componentCoin Sense

    ...

    Not applicable in this setup. FasCard reader does not collect payment from any other devices, and will only send funds to the machine's control.

    ...

    Connect theC-6124-MDB Machine Start Harness to theMDB connection on the Machine Control Assembly.
    cci-readerinstall-kitstep
    KitIDcomponent839
    KitDescSerial

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    Start

    Cci readerinstall step
    componentReader

    Cci readerinstall footer