Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Place theC-6700-TEMPDrill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.

  • Remove existing coin box and coin drop.

    • Attach theC-5414 F2 Mounting Bracketto the C-6923 Metercase Bracketusing(2)C-542010-32 x 1/4 Pan Screws.Run any card reader harnesses through the coin slot openings and the circular hole in theC-6923Metercase Bracket.Install the C-6923 Metercase Bracket into the front of the metercase and secure using the C-0923-ROD Metercase Mounting Rodfrom inside the metercase.
    cci-readerinstall-kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID965
    KitDescCard Only - Coin Model
    step
    componentMounting

    Place theC-6700-TEMPDrill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kit
    KitID906
    KitDescCard Only - Card/OPL Model

    ...

    step
    componentPower

    Use the C-5101 Spade Tapson the incoming power.Tap theL1wire.Tap theN/L2wire.Tap theGround wire.Take the C-5210 Power Adapter Harnessand connect the red tab connectors to the following wires:Connect thebluewire to theL1wire.Connect thebrownwire to theN/L2wire.Connect the green/yellow wire to theGroundwire.Connect the 3-pin connector from the C-5210 Power Adapter Harnessto the matching connection on the C-5602R1Power Converter.Connect the4-pinconnector from the C-5602R1 Power Converterto the matching connection on the C-5500Power Extension Harness.
    cci-readerinstall-kit
    KitID595
    KitDescTap 120/240v Power

    ...

    step
    componentCoin Sense

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect theC-6250 Coin Sense Harness to the harness connected to the Coin Drop.
  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect theC-6271 Coin Sense Harness to the connector on the back of the Coin Drop.
    cci-readerinstall-kit
    KitID700
    KitDescCoin Drop - Factory Optical
    Cci readerinstall kit
    KitID1085
    KitDescCoin Drop - DigiCoin

    Connect Machine Interface Harness

    Connect theC-5272 Machine Start Harness to the machine coin harnessoriginally connected to the coin drop.
    Cci readerinstall kit
    KitID642
    KitDescPulse - Coin Drop (Coin Model)
    step
    componentStart

    Connect theC-5273 Machine Start Harness to the 12-pin machine coin harnessoriginally connected to the coin drop.
    cci-readerinstall-kitstep
    KitID990
    KitDescPulse - 12-pin Coin Harness (All Model)

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    componentReader

    Cci readerinstall footer