cci-readerinstall-kit |
---|
KitID | 906 |
---|
KitDesc | Card Only - Card Models |
---|
|
Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions. Cci readerinstall kit |
---|
KitID | 978 |
---|
KitDesc | Card Only - Coin Models |
---|
|
Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Spread the wings on the C-0941 Vault Cover and install into the coin vault.Refer to for further instructions.
...
cci-readerinstall-kit |
---|
|
Tap power as described in the document by connecting the C-5210 Power Adapter Harness to the incoming power wires.120vac: Tap and connect the blue wire to L1 and the brown wire to N.
240vac: Tap and connect the brown and blue wires to connectors L1 and L2 wires.
Tap and connect the green wire to the ground wire.
Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602 Power Converter.
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
...
...
...
...