Versions Compared

Version Old Version 3 New Version Current
Changes made by

CCI Integration User

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Place theC-6700-TEMPDrill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID841
    KitDescCoin and Card
    componentMounting

    (Coin Model Only)Install theC-5365 Bypass Harnessby removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.

  • Remove factory payment device bay cover or card reader mounting plate.

    • Place the C-6976Quantum Touch Stk Dryer Mounting Bracketinto the payment device opening and secure using the(4) C-107310-24 Hex Nut.Align theC-5414F2 Mounting Bracketwith theC-6976Quantum Touch Stk Dryer Mounting Bracketand attach using the(2) C-5420 10-32 x 1/4" Screws.
    cci-readerinstall-kit
    KitID988
    KitDescCard Only - Quantum Touch Control

    ...

    step
    componentPower

    Connect theC-6204-4012VDC Power Harnessto the H10connection on the Machine Control Assembly.
    1. Connect the green wire to a chassis ground.
  • The remaining end (3-pin molex) connects directly to the rear of the F2 FasCard Reader.
    • cci-readerinstall-kit
    KitID581
    KitDesc12VDC Accessory Power

    ...

    step
    componentCoin Sense

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect theC-6250 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitID700
    KitDescCoin Drop - Factory Optical

    Connect Machine Interface Harness

    componentStart

    Connect theC-5240 Machine Start Harness to theH3 connector on the Machine Control Assembly.
    cci-readerinstall-kit
    KitID582
    KitDescSerial Communication / Pulse

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    step
    componentReader

    Machine Configuration

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameMidas
    PageWithExcerpt_Machine Configuration

    ...