Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Insert the factory block-out plate into the coin vault opening and/or insert the blank plate into the coin-meter aperture opening.
    • Place the C-6700-TEMP Drill Templateon the desired mounting location.Suggested locations to mount:Dryer: (a.)alternate mounting location to the left of the control panel;(b.)coin-meter aperture opening with blank plate;(c.)coin vault opening (If factory block-out plate is installed.).Washer: (a.)coin-meter aperture opening with blank plate;(b.)coin vault opening (If factory block-out plate is installed.).
    Mark hole"C"for the pilot hole of the primary mounting point.Optional: Mark"D"and"E"holes to provide additional support for the reader and ensure minimal "play" on card reader bracket position (Requires additional fasteners. Not supplied by CCI.)Use a1-1/8" hole sawto drill a hole at position"C".Place and align C-5414Mounting Bracketso that the center hole aligns with hole "C".Align the center hole of theC-5414Mounting Bracketto the newly drilled hole on the machine face.Slip theC-5702Chase Nipplethrough the hole and secure with theC-5703Locknut.
    1. Tighten the chase nipple to prevent the bracket from rotating.
    2. Screws may be inserted through the smaller holes provided on the bracket and secured to the mounting face, if desired.
    cci-readerinstall-kit
    KitID906
    KitDescCard Only - Card Models

    Connect Power

    ...

    KitID595
    KitDescTap Machine Power - Washer & Dryer

    ...

    Connect Machine Interface Harness

    ...

    KitID658
    KitDescSerial Communication and Pulse Connection

    ...

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptcom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@7627108f
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    step
    componentMounting

    Cci readerinstall step
    componentPower

    Cci readerinstall step
    componentStart

    Cci readerinstall step
    componentReader

    Machine Configuration

    Washer -

    ...