Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user David Bussman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

...

Cci readerinstall step
componentMounting

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.Place theC-6700-TEMPDrill Template on the desired mounting location.
    cci-readerinstall-kitstep
    KitIDcomponent584
    KitDescCoin and Card
    Power

    Cci readerinstall step
    componentCoin Sense

    Feed all reader harness ends through the open face of theCoin Vault.Spread theC-6602 Vault Mount Bracketwings outward.Feed the harness ends through theC-6602Vault Mount Bracket.Insert theC-6602Vault Mount Bracketinto theCoin Vaultand ensure the inner tabs lock into place so it's secured in place.Feed the remaining harness ends through both theC-6601Filler PlateandC-5414F2 Mounting Bracket.Secure both the C-5414 F2 Mounting Bracket and C-6601 Filler Plate to theC-6602 Vault Mount Bracket with theC-0144 Screws.
    Cci readerinstall kit
    KitID1033719
    KitDescCard Only - Coin Model

    ...

    Coin Drop - Factory Optical

    1. Disconnect coin drop from factory machine harness.

    2. Connect C-6360 Coin Sense Harness to the coin drop.

      1. Connect red to red.

      2. Connect green to brown.

      3. Connect blue to blue.

    Cci readerinstall step
    componentStart

    Tap the machine AC power wires using theC-5101Spade Taps.For120vmodels:L1,N, andGroundwiresFor240vmodels:L1,L2, andGroundwiresConnect the three wires from the C-5210 Power Adapter Harnessto theC-5101 Spade Taps.Connect theBluewire to the L1tap.Connect the Brownwire to the N/L2tap.Connect theGreen/Yellowwire to the Groundtap.Connect the 3-pinconnector from the C-5210 Power Adapter Harnessto the matching connector on the C-5602R1 Power Converter.Connect the 4-pinconnector from theC-5602R1 Power Converterto the matching connector on theC-5500-84Power Extension Harness.Run the C-5500-84Power Extension Harness to the reader mounting location.
    Cci readerinstall kit
    KitID794639
    KitDescTap Source Machine Power

    ...

    Pulse - Coin Connection

    1. Connect the C-5262 Machine Start Harness to the harness originally connected to the coin drop.

      1. Connect to the black and brown wires.

      2. To prevent any potential electrical issues, apply electrical tape over the blue wire connector.

    Cci readerinstall step
    componentExtras

    Disconnect coin drop from factory machine harness
    Cci readerinstall kit
    KitID7191178
    KitDescCoin Drop - Factory Optical
    SAO - Coin and Card

    1. Run C-5262 Machine Start Harness and C-6360 Coin Sense Harness to the lower pocket control board.

    2. Connect C-6360 Coin Sense Harness to the coin drop for the lower pocket.

      1. Connect red to red.

      2. Connect green to brown.

      3. Connect blue to blue.

    3. Connect

    ...

    Cci readerinstall kit
    KitID636
    KitDescPulse - Coin Connection
    Connect

    1. the C-

    5256

    1. 5262 Machine Start Harness to the harness originally connected to the lower pocket’s coin drop.

      1. Connect to the black and brown wires.

      2. To prevent any potential electrical issues, apply electrical tape over the blue wire connector.

    2. Connect

    ...

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    1. the C-6400 Stack Add-on Board to port 5 (Serial Connection Port) on the card reader.

      1. Connect the C-5262 Machine Start Harness connected to the lower pocket Machine Control Assembly to the J1 connection on the C-6400 Stack Add-on Board.

    2. Connect the C-6360 Coin Sense Harness connected to the lower pocket Coin Drop to port 4 (Coin 2 Sense Harness Connection Port) on the card reader.

    Cci readerinstall step
    componentReader

    Cci readerinstall footer