3680 Reader Install Guide
- Chris Kite
- David Bussman
- CCI Integration User
Warning!
This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.
It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.
Overview
Equipment Details
Type: Tumble Dryer (Stack)
Manufacturer: Tolon
Make: Tolon
Model Length: 6
Associated Models
TRDS16
TRDS16U
Recommended Tools and Supplies
Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure
Installation
Connect Coin Sense Harness
Part #: C-6360
Desc 1: Coin Sense Harness
Desc 2: Female taps, Rq. Male
Qty: 1
Disconnect coin drop from factory machine harness.
Connect C-6360 Coin Sense Harness to the coin drop.
Connect red to red.
Connect green to brown.
Connect blue to blue.
Connect Machine Interface Harness
Part #: C-5262
Desc 1: Machine Start Harness
Desc 2: 40" - Male taps, Rq. Female
Qty: 1
Connect the C-5262 Machine Start Harness to the harness originally connected to the coin drop.
Connect to the black and brown wires.
To prevent any potential electrical issues, apply electrical tape over the blue wire connector.