Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Place theC-6700-TEMPDrill Template on the desired mounting location.
  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

  • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID980
    KitDescSurface Mount
    componentMounting

    Optional: Remove existing payment device and cover opening usingC-0939BNA Cover Plate.Place theC-6700-TEMPDrill Template on the desired mounting location.IfC-0939 BNA Cover Plateis used, drilling mounting holes into the plate is recommended.
  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

  • Refer to for further instructions.
    cci-readerinstall-kit
    KitID985
    KitDescPayment Device Bay Mounting

    ...

    step
    componentPower

    Power is supplied through the same Machine Interface Harness described in step 4.

    ...

    Cci readerinstall step
    componentCoin Sense

    ...

    Not applicable in this setup. FasCard reader does not collect payment from any other devices, and will only send funds to the machine's control.

    ...

    Connect theC
    cci-readerinstall-kitstep
    KitIDcomponent839KitDescMDB Start Harness

    6124-MDB Machine Start Harness to theMDB connection on the Machine Control Assembly.
    1. Optional: Use the short pigtail MDB connection to reconnect any other payment devices still in use.
    cci-

    Connect and Mount Reader

    ...

    readerinstall-step
    componentReader

    Cci readerinstall footer