Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.
    cci-readerinstall-kit
    KitID584
    KitDescCoin and Card
    step
    componentMounting

    cci-readerinstall-kit
    KitID869
    KitDescCard Only

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 Bracket on to the C-6920R1 Vault Bracket using C-5420 Screws.

    3. Install the C-6920R1 Vault Bracket in to the coin vault and drop opening. Secure into place using C-1059 Kep Nut.

    ...

    step
    componentPower

    Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

  • Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

  • Connect the C-5500-84 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID794

    ...

    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID716
    KitDescCoin Drop: Edge Connector

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID725
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6389 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID889
    KitDescCoin Drop: Keltner KR-1000

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the male 6-pin connection on the C-6379 Combination Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID655
    KitDescPulse - Edge Connection

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

    Cci readerinstall kit
    KitID889
    KitDescPulse - Keltner KR-1000

    1. Connect the female 6-pin connector of the C-6379 Combination Harness to the machine harness previously connected to the Keltner coin drop.

    Connect the C-0119R1F Machine Start Harness to the 6-pin start harness coming from the Machine Control Assembly.
    Cci readerinstall kit
    KitID623
    KitDescPulse - Rotary Timer
    step
    componentStart

    cci-readerinstall-kit
    KitID666
    KitDescPulse - Set-O-Matic

    1. Connect the C-5388 Machine Start Harness to the connection the Set-O-Matic coin drop was previously connected to.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    Item No.

    Component

    Notes

    1

    Power Connection Port

    Utilizes the same power harnesses as the first generation FasCard reader.

    2

    Pulse Connection Port

    Connection point for pulse machine start harnesses.

    3

    Coin 1 Connection Port

    This is the connection point for the harness input associated with Coin 1.

    4

    Coin 2 Connection Port

    This is the connection point for the harness input associated with Coin 2.

    5

    Serial Connection Port

    This is the connection point for serial machine start harnesses.

    1. Feed remaining harness ends through the mounting hole as described in the Touchscreen Reader Mounting Guide (F2 & F3).

    2. Connect the free end of the pulse start harnesses (white connector), connect to port 2 (Pulse Connection Port) as shown in the image above.

    3. Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.

    4. Connect the free end of the C-5500-84 Power Harness to port 1.

    5. Secure the FasCard reader to base as described in the Touchscreen Reader Mounting Guide (F2 & F3).

    Machine Configuration

    ...

    step
    componentReader

    Cci readerinstall footer