Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

  • Refer to Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.
    cci-readerinstall-kitstep
    KitIDcomponent980
    KitDescSurface Mount

    ...

    Mounting

    Cci readerinstall step
    componentPower

    Power is supplied through the same Machine Interface Harness described in step 4.

    ...

    Cci readerinstall step
    componentCoin Sense

    ...

    Not applicable in this setup. FasCard reader does not collect payment from any other devices, and will only send funds to the machine's control.

    ...

    cci-readerinstall-kitstep
    KitIDcomponent839
    KitDescSerial
    1. Connect the C-6124-MDB Machine Start Harness to the MDB interface harness on the Machine Control Assembly.

      1. Optional: Use the pigtail MDB connector to reconnect any existing payment devices.

    ...

    Start

    Cci readerinstall step
    componentReader

    Cci readerinstall footer