Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kitstep
    KitIDcomponent584
    KitDescCoin and Card

    Connect Power

    Connect Coin Sense Harness

    Mounting

    Cci readerinstall step
    componentPower

    cci-readerinstall-kit
    KitID704
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6253 Coin Sense Harness to the harness connected to the coin drop micro switch.

    Connect Machine Interface Harness

    step
    componentCoin Sense

    cci-readerinstall-kitstep
    KitIDcomponent636
    KitDescPulse

    1. Connect the C-5256 Machine Start Harness to the coin drop harness previously connected to the coin drop micro switch.

    ...

    Start

    Cci readerinstall step
    componentReader

    Cci readerinstall footer