Install Mounting Hardware
Connect Power
...
| cci-readerinstall-kitstep |
|---|
| KitIDcomponent | 923 |
|---|
| KitDesc | Coin Drop - Factory Optical |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly. Connect the C-6332 Coin Sense Harness to the harness connected to the Coin Drop. Connect the Red connector to the Coin Acceptor connection, where the coin drop was previously connected, on the Machine Control Assembly.
|
Connect Machine Interface Harness
| cci-readerinstall-kitstep |
|---|
| KitIDcomponent | 608 |
|---|
| KitDesc | Serial |
|---|
| Connect the C-0114-MLV Machine Start Harness to the middle X1 port on the serial communication board.
CCIDOCCOM Boardsfalse
Connect and Mount Reader
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | CCIDOC |
|---|
| MultiExcerptName | F2 Reader |
|---|
| PageWithExcerpt | _Reader Ports |
|---|
|
...
Feed remaining harness ends through the mounting hole.
...
Connect the free end of the C-0114-MLV Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.
...
(Coin and Card Installation Only) Connect the free end of the C-6332 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
...
Machine Configuration
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | CCIDOC |
|---|
| MultiExcerptName | Continental ProfitPlus |
|---|
| PageWithExcerpt | _Machine Configuration |
|---|
|
...