Install Mounting Hardware
| cci-readerinstall-kitstep |
|---|
| KitID | 616 |
|---|
| KitDesc | Coin and Card |
|---|
|
Place theC-5700-TEMPDrill Template on the desired mounting location.Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions. |
|
| cci-readerinstall-kit |
|---|
| KitID | 905 |
|---|
| KitDesc | Card Only - Card Model |
|---|
|
Place theC-5700-TEMPDrill Template on the desired mounting location.Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions.| Cci readerinstall kit |
|---|
| KitID | 910 |
|---|
| KitDesc | Card Only - Coin Drop |
|---|
|
Remove coin drops and coin boxes.Remove vault service switch connections from the switch and bridge using the C-5365 Bypass Harness.Take theC-0940Vault Coverand bend the inner tabs outward.Insert the C-0940Vault Cover into the coin box opening. The previously bent tabs should catch the inner lip of the coin vault and secure the bracket in place.Place theC-5700-TEMPDrill Template on the desired mounting location.Verify included harnesses will reach desired location without encountering interference from internal machine components.
Suggested mounting location:Coin drop opening.Refer to for further instructions.| Cci readerinstall kit |
|---|
| KitID | 1055 |
|---|
| KitDesc | Card Only - Coin Slide |
|---|
|
Remove coin slides and coin boxes.Remove vault service switch connections from the switch and bridge using the C-5365 Bypass Harness.Take theC-0940Vault Coverand bend the inner tabs outward.Insert the C-0940Vault Cover into the coin box opening. The previously bent tabs should catch the inner lip of the coin vault and secure the bracket in place.Place theC-5700-TEMPDrill Template on the desired mounting location.Verify included harnesses will reach desired location without encountering interference from internal machine components.
Place the C-5035 Label over the coin slide opening.Refer to for further instructions.
...
| cci-readerinstall-kit |
|---|
| KitID | 595 |
|---|
| KitDesc | Tap Machine Source Power |
|---|
|
Tap power as described in the document by connecting theC-5210Power Adapter Harnessto the power distribution panel inside the machine.120vac: Connect the blue wire to L1 and the brown wire to N.
240vac: Connect the blue wire to L1 and the brown wire to L2.
Connect the green wire to ground.
Connect the opposite end of theC-5210Power Adapter Harnessto theC-5602R1Power Converter.Connect theC-5500Power Extension Harness to the appropriate connector on theC-5602R1Power Converter. The remaining cable end connects to the FasCard reader.
...
| cci-readerinstall-kitstep |
|---|
| KitID | 674 |
|---|
| KitDesc | Factory - Optical Coin Sensor |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly.Connect theC-5250 Coin Sense Harness to the harness connected to the Coin Drop.| Cci readerinstall kit |
|---|
| KitID | 677 |
|---|
| KitDesc | Factory - Coin Slide Switch |
|---|
|
Disconnect the factor coin drop harness from the microswitch on the coin drop.Connect theC-5253 Coin Sense Harness to the microswitch on the the coin drop.
Connect Machine Interface Harness
| Cci readerinstall kit |
|---|
| KitID | 645 |
|---|
| KitDesc | Pulse - Optical Coin Sensor |
|---|
|
Connect theC-5300-NC Machine Start Harness to theCoin 1 connection on the Machine Control Assembly. |
|
| cci-readerinstall-kitstep |
|---|
| KitID | 636 |
|---|
| KitDesc | Pulse - Coin Slide Microswitch |
|---|
|
Connect theC-5256 Machine Start Harness to the factory coin harness previously connected to the micro switch on the coin drop. |
|
| cci-readerinstall-kit |
|---|
| KitID | 603 |
|---|
| KitDesc | Serial - MDC Control |
|---|
|
Connect theC-0110-TOP Machine Start Harness to theH3 connector on the Machine Control Assembly.Connect the C-0110-CP Jumper Plug to the H6connection on the Machine Control Assembly.
Connect and Mount Reader
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | CCIDOC |
|---|
| MultiExcerptName | F1 Reader |
|---|
| PageWithExcerpt | _Reader Ports |
|---|
|
...
Machine Configuration
...