Page Comparison

Cci readerinstall header

...

Cci readerinstall step

component	Mounting

Cci readerinstall step

component	Power

Cci readerinstall step

component	Coin Sense

Cci readerinstall kit

KitID	719
KitDesc	Coin Drop - Factory Optical

Disconnect coin drop from factory machine harness.
Connect C-6360 Coin Sense Harness to the coin drop.
1. Connect red to red.
2. Connect green to brown.
3. Connect blue to blue.

Cci readerinstall step

component	Start

Cci readerinstall kit

KitID	639
KitDesc	Pulse - Coin Connection

...

Start Harness to the harness originally connected to the coin drop.
1. Connect to the black and brown wires.
2. To prevent any potential electrical issues, apply electrical tape over the blue wire connector.

cci-readerinstall-step

component	Extras

cci-readerinstall-kit

Pulse - Coin Connection

KitID	6361178
KitDesc		SAO - Coin and Card

Run C-5262 Machine Start Harness and C-6360 Coin Sense Harness to the lower pocket control board.
Connect C-6360 Coin Sense Harness to the coin drop for the lower pocket.
1. Connect red to red.
2. Connect green to brown.
3. Connect blue to blue.
Connect the C-5256 5262 Machine Start Harness to the harness originally connected to the lower pocket’s coin drop.
1. Connect to the black and brown wires.
2. To prevent any potential electrical issues, apply electrical tape over the blue wire connector.

...

1. .
Connect the C-6400 Stack Add-on Board to port 5 (Serial Connection Port) on the card reader.
1. Connect the C-5262 Machine Start Harness connected to the lower pocket Machine Control Assembly to the J1 connection on the C-6400 Stack Add-on Board.
Connect the C-6360 Coin Sense Harness connected to the lower pocket Coin Drop to port 4 (Coin 2 Sense Harness Connection Port) on the card reader.

Cci readerinstall step

component	Reader

Cci readerinstall footer

Versions Compared