Versions Compared

Old Version 7

changes.mady.by.user David Bussman

Saved on

compared with

New Version Current

changes.mady.by.user David Bussman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID719
KitDescCoin Drop - Factory Optical

  1. Disconnect coin drop from factory machine harness.

  2. Connect C-6360 Coin Sense Harness to the coin drop.

    1. Connect red to red.

    2. Connect green to brown.

    3. Connect blue to blue.

cci-readerinstall-step
componentStart

cci-readerinstall-kit
KitID636639
KitDescPulse - Coin Connection

  1. Connect the C-5262 Machine Start Harness to the harness originally connected to the coin drop.

    1. Connect to the black and brown wires.

    2. To prevent any potential electrical issues, apply electrical tape over the blue wire connector.

Cci readerinstall step
componentExtras

Cci readerinstall kit
KitID1178
KitDescSAO - Coin and Card

  1. Run C-5262 Machine Start Harness and C-6360 Coin Sense Harness to the lower pocket control board.

  2. Connect C-6360 Coin Sense Harness to the coin drop for the lower pocket.

    1. Connect red to red.

    2. Connect green to brown.

    3. Connect blue to blue.

  3. Connect the C-5256 5262 Machine Start Harness to the harness originally connected to the lower pocket’s coin drop.

    1. Connect to the black and brown wires.

    2. To prevent any potential electrical issues, apply electrical tape over the blue wire connector.

  4. Connect the C-6400 Stack Add-on Board to port 5 (Serial Connection Port) on the card reader.

    1. Connect the C-5262 Machine Start Harness connected to the lower pocket Machine Control Assembly to the J1 connection on the C-6400 Stack Add-on Board.

  5. Connect the C-6360 Coin Sense Harness connected to the lower pocket Coin Drop to port 4 (Coin 2 Sense Harness Connection Port) on the card reader.

Cci readerinstall step
componentReader

...