Page Comparison

Custom Install Scenario

This install guide has been created and intended only for use at FasCard account F0913, where a previous card system is being replaced.

C-5358 coin sense harness is being sent in place of the standard coin sense harness as the previous card system spliced into the coin drop harness.

1. Disconnect the Coin Drop from the previous card reader.

2. Connect the C-5358 Coin Sense Harness to the harness connected to the Coin Drop.

   1. Connect the White wire from the coin drop to the White wire terminal on C-5358.

   2. Connect the Green wire from the coin drop to the Green wire terminal on C-5358.

   3. Connect the Brown wire from the coin drop to the Brown wire terminal on C-5358.