Warning!
This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.
It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.
Overview
Equipment Details
Type: Washer Extractor
Manufacturer: Dexter
Make: Dexter
Model Length: 22
T-1800 washers (WC1800) require Dexter 2.2 machine firmware and 1.12.01 or later reader firmware.
Associated Models
WC0300XA10BC2XSSBCSUSA
WC0300XA10EC1XSSBCSUSA
WC0300XA10EC1XSSBCSUSX
WC0300XA10EC1XSSKCSUSA
WC0300XA10EC1XSSKCSUSX
WC0300XA10EC2XSSBCSUSA
WC0300XA10EC2XSSBCSUSX
WC0300XA10EC2XSSKCSUSA
WC0300XA10EC2XSSKCSUSX
WC0300XA10EC2XSSVCSUSA
WC0300XA12EC1XSSBCSUSA
WC0300XA12EC1XSSBCSUSX
WC0300XA12EC1XSSKCSUSA
WC0300XA12EC2X55BC5USA
WC0300XA12EC2X55BC5USX
WC0300XA12EC2XSFBCSUSX
WC0300XA12EC2XSSBCSUSA
WC0300XA12EC2XSSBCSUSX
WC0300XA12EC2XSSKCSUSA
WC0300XA12EC2XSSKCSUSX
WC0300XA12EC4XSSBCSUSA
WC0300XB10EC4XFFBCSUSA
WC0300XB10EC4XSSBCSUSA
WC0300XB10EC4XSSBCSUSX
WC0300XB10EC4XSSKCSUSA
WC0300XB10EC4XSSKCSUSX
WC0300XB10EC4XXXKXSUSA
WC0300XB12EC1XSSKCSUSX
WC0300XB12EC2XSSBCSUSA
WC0300XB12EC2XSSKCSUSA
WC0300XB12EC4XFFBCFUSX
WC0300XB12EC4XSSBCSUSA
WC0300XB12EC4XSSBCSUSX
WC0300XB12EC4XSSBSCUSX
WC0300XB12EC4XSSKCSUSA
WC0300XB12EC4XSSKCSUSX
WC0300XB12EC4XSSKSCUSX
WC0300XB12EC4XSSVCSUSX
WC0300XB12EC5XSSBCSUSX
WC0300XB12EC5XSSKCSUSA
WC0350XA12EC1XSSBCSUSA
WC0350XA12EC1XSSBCSUSX
WC0350XA12EC1XSSKCSUSX
WC0350XA12EC2XSSBCSUSA
WC0350XA12EC2XSSBCSUSX
WC0350XA12EC2XSSBSCUSX
WC0350XA12EC2XSSKCSUSA
WC0350XA12EC2XSSKCSUSX
WC0350XA12EC4XSSBCSUSA
WC0350XB12EC4XSS5CSUSA
WC0350XB12EC4XSSBCSUSA
WC0350XB12EC4XSSBCSUSX
WC0350XB12EC4XSSKCSUSA
WC0350XB12EC4XSSKCSUSX
WC0350XB12EC5XSSKCSUSX
WC0400XA10EC2XSSKCSUSA
WC0400XA10EC2XSSKCSUSX
WC0400XA12BC2XSSBCSUSA
WC0400XA12EC1XSSBCSUSA
WC0400XA12EC1XSSBCSUSX
WC0400XA12EC1XSSKCSUSA
WC0400XA12EC1XSSKCSUSX
WC0400XA12EC2X55BC5USA
WC0400XA12EC2XFSBCSUSA
WC0400XA12EC2XSS8CSUSA
WC0400XA12EC2XSSBCSUSA
WC0400XA12EC2XSSBCSUSX
WC0400XA12EC2XSSECSUSA
WC0400XA12EC2XSSKCSUSA
WC0400XA12EC2XSSKCSUSX
WC0400XA12EC4XSSBCSUSA
WC0400XB10EC4XSSBCSUSA
WC0400XB10EC4XSSBCSUSX
WC0400XB12EC1XSSKCSUSX
WC0400XB12EC2XSSKCSUSA
WC0400XB12EC4XFFBCSUSA
WC0400XB12EC4XSSBCSUSA
WC0400XB12EC4XSSBCSUSX
WC0400XB12EC4XSSKCSUSA
WC0400XB12EC4XSSKCSUSX
WC0400XB12EC4XSSKSCUSX
WC0400XB12EC4XSSNCSUSX
WC0400XB12EC5XSSKCSUSA
WC0450XA12EC1XSSBCSUSX
WC0450XA12EC1XSSKCSUSA
WC0450XA12EC1XSSKCSUSX
WC0450XA12EC2XSSBCSUSA
WC0450XA12EC2XSSBCSUSX
WC0450XA12EC2XSSBSCUSA
WC0450XA12EC2XSSBSCUSX
WC0450XA12EC2XSSDCSUSX
WC0450XA12EC2XSSKCSUSA
WC0450XA12EC2XSSKCSUSX
WC0450XB12EC2XSSBCSUSX
WC0450XB12EC2XSSKCSUSX
WC0450XB12EC4XSSBCSUSA
WC0450XB12EC4XSSBCSUSX
WC0450XB12EC4XSSECSUSX
WC0450XB12EC4XSSKCSUSA
WC0450XB12EC4XSSKCSUSX
WC0600XA10EC2XSSBCSUSA
WC0600XA10EC2XSSBCSUSX
WC0600XA10EC2XSSKCSUSX
WC0600XA12EC1XSSBCSUSA
WC0600XA12EC1XSSBCSUSX
WC0600XA12EC1XSSKCSUSA
WC0600XA12EC1XSSKCSUSX
WC0600XA12EC2XSSBCSUSA
WC0600XA12EC2XSSBCSUSX
WC0600XA12EC2XSSCKSUSA
WC0600XA12EC2XSSKCSUSA
WC0600XA12EC2XSSKCSUSX
WC0600XA12EC4XSSBCSUSA
WC0600XB10EC4XSSBCSUSX
WC0600XB123C4XSSBCSUSX
WC0600XB12DC4XSSBCSUSA
WC0600XB12EC2XSSBCSUSA
WC0600XB12EC2XSSKCSUSX
WC0600XB12EC46SSBCSUSA
WC0600XB12EC4CSSBCSUSX
WC0600XB12EC4XFSBCSUSA
WC0600XB12EC4XSSBBSUSA
WC0600XB12EC4XSSBCSUSA
WC0600XB12EC4XSSBCSUSX
WC0600XB12EC4XSSECSUSA
WC0600XB12EC4XSSKCSUSA
WC0600XB12EC4XSSKCSUSX
WC0600XB12EC4XSSKSCUSA
WC0600XB12EC4XSSKSCUSX
WC0600XB12EC4XSSNCSUSX
WC0600XB12EC4XSSVCSUSA
WC0600XB12EC4XXSBCSUSX
WC0600XB12EC4XXXBCSUSA
WC0650XA12EC2XSSBCSUSA
WC0650XA12EC2XSSBCSUSX
WC0650XA12EC2XSSKCSUSA
WC0650XA12EC2XSSKCSUSX
WC0650XA12EC4XFSBCSUSX
WC0650XB12EC4XSSBCSUSA
WC0650XB12EC4XSSBCSUSX
WC0650XB12EC4XSSKCSUSA
WC0650XB12EC4XSSKCSUSX
WC0750XA10EC1XSSBCSUSA
WC0750XA12EC1XSSBCSUSA
WC0750XA12EC1XSSBCSUSX
WC0750XA12EC1XSSKCSUSA
WC0750XA12EC2XSSBCSUSA
WC0750XA12EC2XSSBCSUSX
WC0750XA12EC2XSSKCSUSA
WC0750XA12EC2XSSKCSUSX
WC0750XB12EC3XSSBCSUSA
WC0750XB12EC4XSSBCSUSA
WC0750XB12EC4XSSBCSUSX
WC0900XA10EC1XSSKCSUSA
WC0900XA10EC2XSSKCSUSX
WC0900XA12EC1XSSBCSUSA
WC0900XA12EC1XSSBCSUSX
WC0900XA12EC1XSSCCSUSA
WC0900XA12EC1XSSKCSUSA
WC0900XA12EC2X55BCSUSA
WC0900XA12EC2XSSBCSUSA
WC0900XA12EC2XSSBCSUSX
WC0900XA12EC2XSSDCSUSA
WC0900XA12EC2XSSDCSUSX
WC0900XA12EC2XSSECSUSX
WC0900XA12EC2XSSKCSUSA
WC0900XA12EC2XSSKCSUSX
WC0900XA12EC2XSWBSGUSX
WC0900XA12EC4XSSBCSUSA
WC0900XA15EC1XSSBCSUSX
WC0900XA15EC2XSSBCSUSX
WC0900XB10EC4XSSBCSUSA
WC0900XB10EC4XSSBCSUSX
WC0900XB12EC1XSSBCSUSX
WC0900XB12EC2XSSBCSUSA
WC0900XB12EC2XSSBCSUSX
WC0900XB12EC2XSSKCSUSX
WC0900XB12EC3XSSBCSUSA
WC0900XB12EC3XSSBCSUSX
WC0900XB12EC4KSSBCSUSA
WC0900XB12EC4XSFBCSUSA
WC0900XB12EC4XSS8SCUSA
WC0900XB12EC4XSSBCFUSA
WC0900XB12EC4XSSBCSUSA
WC0900XB12EC4XSSBCSUSX
WC0900XB12EC4XSSBCXUSX
WC0900XB12EC4XSSBTSUSX
WC0900XB12EC4XSSECSUSX
WC0900XB12EC4XSSKCSUSA
WC0900XB12EC4XSSKCSUSX
WC0900XB12EC4XSSKSCUSA
WC0900XB12EC4XSSKSCUSX
WC0900XB12EC4XSSKTSUSX
WC0900XB12EC4ZSSBCSUSA
WC0900XB12EC5XSSBCSUSA
WC0900XB23EC4XSSBCSUSA
WC0950XA12EC1XSS8CSUSA
WC0950XA12EC1XSSBCSUSA
WC0950XA12EC1XSSBCSUSX
WC0950XA12EC2XSFKCSUSX
WC0950XA12EC2XSSBCSUSA
WC0950XA12EC2XSSBCSUSX
WC0950XA12EC2XSSDCSUSX
WC0950XA12EC2XSSKCSUSA
WC0950XA12EC2XSSKCSUSX
WC0950XA12EC4XFSBCSUSX
WC0950XB12EC4XFSBCSUSX
WC0950XB12EC4XSSBCSUSA
WC0950XB12EC4XSSBCSUSX
WC0950XB12EC4XSSKBSUSX
WC0950XB12EC4XSSKCSUSA
WC0950XB12EC4XSSKCSUSD
WC0950XB12EC4XSSKCSUSX
WC0950XB12EC4XSSKDSUSA
WC0950XB12EC4XSSLCSUSX
WC0950XB12EC5XSSKESUSX
WC1200XA10EC2XSSKCSUSX
WC1200XA12BC2XSSBCSUSA
WC1200XA12EC1XSSBCSUSA
WC1200XA12EC1XSSBCSUSX
WC1200XA12EC1XSSKCSUSA
WC1200XA12EC1XSSKCSUSX
WC1200XA12EC2X55BCSUSA
WC1200XA12EC2X55BCSUSX
WC1200XA12EC2XSS5CSUSX
WC1200XA12EC2XSS8CSUSA
WC1200XA12EC2XSSACSUSA
WC1200XA12EC2XSSBCSUSA
WC1200XA12EC2XSSBCSUSX
WC1200XA12EC2XSSDCSUSX
WC1200XA12EC2XSSKCGUSX
WC1200XA12EC2XSSKCSUSA
WC1200XA12EC2XSSKCSUSX
WC1200XA12EC4XSSBCSUSA
WC1200XB10EC4XSSBCSUSA
WC1200XB10EC4XSSBCSUSX
WC1200XB12BC4XSSBCSUSX
WC1200XB12EC1XSSBCSUSA
WC1200XB12EC2XSSBCSUSA
WC1200XB12EC2XSSBCSUSX
WC1200XB12EC2XSSKCSUSA
WC1200XB12EC3XSSBCSUSA
WC1200XB12EC3XSSKCSUSA
WC1200XB12EC4XFFKCSUSA
WC1200XB12EC4XFSBCSUSA
WC1200XB12EC4XSBBGSUSA
WC1200XB12EC4XSS8CSUSX
WC1200XB12EC4XSSBCGUSA
WC1200XB12EC4XSSBCSUSA
WC1200XB12EC4XSSBCSUSX
WC1200XB12EC4XSSBCXUSA
WC1200XB12EC4XSSKCSUSA
WC1200XB12EC4XSSKCSUSX
WC1200XB12EC4XSSXCSUSX
WC1200XB12EC5XSSBCSUSA
WC1200XB12EC5XSSKCSUSA
WC1450XA10EC2XSSBCSUSA
WC1450XA10EC2XSSBCSUSD
WC1450XA12EC1ASSBCSUSD
WC1450XA12EC1XSSBCSUSA
WC1450XA12EC1XSSBCSUSD
WC1450XA12EC1XSSBCSUSX
WC1450XA12EC1XSSKCSUSA
WC1450XA12EC1XSSKCSUSX
WC1450XA12EC2XSSBCSUSA
WC1450XA12EC2XSSBCSUSD
WC1450XA12EC2XSSBCSUSX
WC1450XA12EC2XSSKCSUSA
WC1450XA12EC2XSSKCSUSD
WC1450XA12EC2XSSKCSUSX
WC1450XA12EC4XSSBCSUSX
WC1450XA15EC2XSSBCSUSX
WC1450XB12EC2XSSBCSUSX
WC1450XB12EC4X55BCSUSD
WC1450XB12EC4XFSBCSUSX
WC1450XB12EC4XSSACSUSX
WC1450XB12EC4XSSBCSUSA
WC1450XB12EC4XSSBCSUSD
WC1450XB12EC4XSSBCSUSX
WC1450XB12EC4XSSKCSUSA
WC1450XB12EC4XSSKCSUSD
WC1450XB12EC4XSSKCSUSX
WC1450XB12EC4XSSVCSUSD
WC1450XB12EC5XSSKCSUSX
WC1800XB12EC4XFSBCSUSX
WC1800XB12EC4XSSBCSUSA
WC1800XB12EC4XSSBCSUSD
WC1800XB12EC4XSSBCSUSX
WC1800XB12EC4XSSBXSUSD
WC1800XB12EC4XSSCXSUSA
WC1800XB12EC4XSSCXSUSD
WC1800XB12EC4XSSKCSUSA
WC1800XB12EC4XSSKCSUSD
WC1800XB12EC4XSSKCSUSX
WC1800XB12EC5XSSKCSUSA
Recommended Tools and Supplies
Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure
Installation
Install Mounting Hardware
Part #: C-6801
Desc 1: F2/F3 Reader Mounting Kit
Desc 2: Universal
Qty: 1
Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to FasCard Mounting Guide for further instructions.
Connect Power
Connect Coin Sense Harness
Part #: C-6253
Desc 1: Coin Sense Harness
Desc 2: 28"
Qty: 1
Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-6253 Coin Sense Harness to the harness connected to the Coin Drop.
Part #: C-6258
Desc 1: Coin Sense Harness (SA)
Desc 2: WCAD
Qty: 1
Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.
Part #: C-6382
Desc 1: Coin Sense Harness
Desc 2: Imonex EM100/EM3
Qty: 1
Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.
Connect Machine Interface Harness
Part #: C-5254
Desc 1: Machine Start Harness
Desc 2: Dexter Stack Dryer
Qty: 1
Connect the C-5254 Machine Start Harness to the P2 connector on the Machine Control Assembly.
Connect and Mount Reader
Feed remaining harness ends through mounting bracket.
For serial setups:
Connect the free end of the Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.
Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
For coin pulse setups:
Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
Connect the the Cat5 cables running to and from the adjacent machines to ports labeled 3 (Line Connection Ports) as shown in the image above.
Secure the LaundryCard reader to the bracketry using included hardware.
Feed remaining harness ends through mounting bracket.
For serial setups:
Connect the free end of the Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.
Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
For coin pulse setups:
Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
Connect the free end of the Power Harness to port 1.
Secure the L2 reader to base as described in FasCard F2/F3 Reader Installation Guide - Front Mount.
Feed remaining harness ends through the mounting hole as described in the F1 Reader Mounting Guide.
Connect the free end of the Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.
Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
Connect the free end of the Power Extension Harness to port 4 (Power Harness Connection Port) as shown in the image above.
Secure the FasCard reader to base as described in the F1 Reader Mounting Guide.
Feed remaining harness ends through the mounting hole as described in FasCard F2/F3 Reader Installation Guide - Front Mount.
For Serial Setups:
Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
Connect the free end of the Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.
For Pulse Setups:
Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
For dual coin drop setups connect the secondary Coin Sense Harness to port 4 (Coin Sense Harness Connection Port) as shown in the image above.
Connect the free end of the Power Harness to port 1.
Secure the FasCard reader to base as described in FasCard F2/F3 Reader Installation Guide - Front Mount.
CCI Software Configuration
| Machine Control | Pulse | Serial |
|---|---|---|
| *NO NAME* | SingleVend (Relay) / 55ms | *NOT SUPPORTED* |
| C-Series (1.5) | SingleVend (Relay) / 55ms | Dexter C-Series Washer Extractor |
Additional Resources
- How to Program Address on a FasCard Reader
- FasCard Admin Site - Equipment Setup
- FasCard Admin Site - Machine Setup
- FasCard Admin Site - Pricing & Features Schedule
- F1 Reader Mounting Guide
- FasCard F2/F3 Reader Installation Guide - Front Mount
- FasCard Installation Videos
- FasCard Kit Installations - Machine Configurations & Related Documents