Recommended Tools and Supplies
| Description | Link/Source | Image |
|---|---|---|
| Champion CT7-1-1/8 Tungsten Carbide Tipped 1-1/8-Inch Hole Cutter-1-Inch Thick Metal (Or Equivalent) |  | |
| 9/64" Drill Bit For drilling stainless steel | Amazon |  |
| Cutting Oil | Amazon |  |
| Heavy Duty Professional 3/8" Magnesium Drill with #2 drill tip extension. (Or Equivalent) | Harbor Freight |  |
| Right Angle Drill Attachment (Or Equivalent, used on some dryer installs) | Amazon |  |
| Center Punch (Or Equivalent) | Amazon | |
| Hammer | Amazon | |
| Pliers (Or Equivalent) | Amazon |  |
| No.2 Phillips Screwdriver (Or Equivalent) | Amazon |  |
| 3/32" Head Allen Hex Screwdriver (Or Equivalent) | Amazon |  |
| Fine Point Sharpie Marker (Or Equivalent) | Amazon |  |
| Tape Measure (Or Equivalent) | Amazon |  |
| Cable Ties (Or Equivalent) | Amazon |  |
| Electrical Tape (Or Equivalent) | Amazon |  |
| FasCard Drill Template *Included with Satellite Install Kit | CCI |  |
Assumptions
This document assumes the installer has a working knowledge of hand tools and of the target machine in question. It is recommended that instructions herein be performed by individuals who are qualified to perform these tasks. CCI takes no responsibility for the accuracy of this document, or for any damage that may occur to the target machine. This document assumes the following items have been acquired and are not a part of the installation kit.
Install Guide
WARNING
- Always make sure that the power is turned off to target machine before starting installation
- Always take precautions to protect eyes and hands when performing installation
! NOTE !
Images in this document may not match the exact machine for which the instructions are designed for and are used to help describe procedures