This guide explains how to setup a Singlevend equipment type to use with a LaundryCard reader + door strike to restrict access to unlocking the door to a desired employee: Attendants, Technicians, or Managers.
\uD83D\uDCD8 Instructions
Create a new (or modify existing) Singlevend equipment type.
Restart WCRD to initiate bootloader for firmware download.
Configure the pulse length as 5000 (may vary per setup).
Cycle time: 2 seconds (how much time to allow door to stay open before requiring another card insert)
Set the ‘Equipment Type’ dropdown according the the following:
100+ for the type configures a ‘secure machine’ which is used to restrict the card reader to specific employee cards.
For a secure machine, setting an equipment type to one of the values below will require a proper card to use the reader.
101, 111, 121... = Attendant or better
103, 113, 123... = Technician or better
104, 114, 124... = Collector or better
105, 115, 125... = Manager only
Example:
Employee door for attendants or better:
\uD83D\uDCCB Related articles
Filter by label
There are no items with the selected labels at this time.