This document lists the components of the current model of the LaundryCard Version 1 Cabinet and its ancillary parts.
This product is no longer being sold.
Cabinet Front Door - Exterior | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-1250 | Medeco Lock Shell w/ Mounting Nut | There are two front and two rear locks. |
2 | C-1025 | Card Dispenser | ||
3 | C-1052 | LCD Touchscreen Monitor | New monitor installation requires kit number ELO_RET_V1. Sub-assembly parts, excluding the monitor, use part number C-1052-V1. | |
4 | C-1002 | Bill Note Acceptor (BNA) | ||
5 | C-0100-VC | LaundryCard Card Reader Version 1 | ||
Cabinet Front Door – Internal Main Hardware Components | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENT |
| 1 | C-1010 | Welsh Allyn Barcode Scanner | Replaced with C-1023 (Motorola/Zebra Barcode Scanner). |
2 | C-1025 | Card Dispenser | ||
3 | C-1002 | Bill Acceptor Unit (BNA) | ||
| 4 | C-1006-500 | BNA 500 Note Stacker | Included with the BNA. Compatible with C-1006-1000, for 1000 note capacity. | |
5 | C-0100-VC | LaundryCard Reader Version 1 | ||
| 6 | C-1052 | LCD Touchscreen Monitor | New monitor installation requires kit number ELO_RET_V1. Sub-assembly parts, excluding the monitor, use part number C-1052-V1. | |
Cabinet Front Door - Interior Hardware Cabling | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENTS |
|---|---|---|---|---|
| 1 | C-1038 | Barcode Scanner Cable | Replaced with C-1023 (Motorola/Zebra Barcode Scanner). |
| 2 | C-0630R1 | Card Dispenser Interface Cable Revision 1 | ||
| 3 | C-1003 | BNA Interface Cable | Sold separately. | |
| 4 | C-0640 | BNA Power Cable | Included with C-1002 (BNA). | |
Cabinet Front Door - Interior Hardware Cabling Continued | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-1052P | Monitor Power Supply Cable | ||
| 2 | VGA Cable | |||
| 3 | C-1330 | USB-A to USB-B Cable | Length: 6ft. | |
| 4 | C-0640 | BNA Power Cable | Included with C-1002 (BNA). | |
| 5 | C-0175 | Cat 5 Network Cable | Length: 3ft. | |
Cabinet - Internal Hardware and Connections | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-1277 | 120mm Cooling Fan Finger Guard | |
| 1 | C-1275 | 120mm Cooling Fan | ||
| 2 | Power Switches | |||
| 3 | C-1045 | 5V Power Supply | No longer being sold. | |
| 4 | C-0500R1 / C-0501R1 | Master Distribution Board / Slave Distribution Board | Replaced with C-0526 (Version 2 Control Head). For a Distribution Board to v2 Control Head replacement, use kit number K-0526-A. | |
| 5 | C-1035 | Male to Female RS232 Cable | Length: 6ft. | |
| 6 | C-0550 | 15V Power Supply | ||
| 7 | C-1041 | Tripp-Lite UPS 550VA Battery Backup | ||
Cabinet - Internal - Hubs | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-0625 | Linksys Hub | Replaced with C-0629 (D-Link 16 Port Network Switch). |
| 2 | Linksys Power Cable | Included with C-0625 (Linksys Hub). No longer being sold. | ||
| 3 | C-1375 | Slotted Wall Duct | Size: 1.5" X 1.5" (W X D), 1' length. | |
| 4 | C-1027 / C-1028 | SeaPort 4 Port Serial Hub / SeaPort 8 Port Serial Hub | Replaced with C-0526 (Version 2 Control Head). | |
| 5 | C-0605 | V.92 US. Robotics Modem | Discontinued. |
Note
This section provides information about the remaining components for v1 Cabinets. They are all discontinued and/or have been replaced by newer generation components.
Discontinued components | REF | DESCRIPTION | COMMENTS |
|---|---|---|---|
V.92 US. Robotics Modem (Part Number C-0605) | |||
| 1 | On/Off Switch | |
| 2 | AC Power Port | ||
| 3 | Parallel Data Port | ||
| 4 | Dip Switches | Leave switches #3 and #8 in the ON position. | |
| 5 | RJ11 Port | ||
| 6 | RJ45 Port | Used to connect the modem to the PC. | |
SeaLink Hub (Part Number C-1027 / C-1028) | |||
| SeaPort 8 Port Serial Hub | Front and rear view of the device with 8 RS232 ports. | |
Card Dispenser Board (Part Number C-0607) | |||
| 1 | Card Dispenser 12V Interface Board | Replaced with C-0526 (Version 2 Control Head). |
